Berlogakarelia.ru.

Morms, the devil wins more and more adherents every year. This type of inspection (conditionally, some fishermen is planted by a hooker on a hook and achieve impressive catch) stably shows good results even in Clehosimia. This is due to the fact that this bait excites fish not only food interest, but a banal curiosity. Among the fishermen there was a number of representatives who catch fish in the winter only on the devil. Others are used with other rods, for example, for exploration of holes.

roach on devil

What is a devil?

The devil is a cleaner of an elongated shape with a small piled or suspended triple at the bottom, intended for a vertical game. Developed a variety of forms and modifications of this bait. The prototype of such a mobile in the 60s of the last century was the sea bait "Bug" V. Zakharov from Magadan. Since then, devils turned into a separate direction of winter fishing. Some sources claim that this veam is reminded of shape and movements in the water of the booplasa, so this bait is so good and attracts fish.

Despite the seeming simplicity of catching on this tackle, novice is not always possible to successfully master it immediately. This happens because of the initial absence in tactics of important details:

  1. Catching on the line requires a fine detuning the turbine under the weight of the bait.
  2. In arsenal, you need to have a set of pre-configured and equipped fishing rods with different shapes in shape and weight.
  3. On fishing, the bait options are applied (on already harvested rods) until the worker is found under these conditions.
  4. The proverb "Wolf's feet is fed" is most suitable for winter fishing with a non-Raspical Merzness Dam.
  5. It is necessary to master in excellence in several ways to play. Often biplons happen on a pause or with a sharp change of the game, the posting rate.

This article outlines how to catch fish on the line in the winter, choose the right bait and configure fishing rods. Considered some secrets and nuances of such fishing.

Damn with bend

Unscoach

Fishing on the devil is a separate direction of treated inspection. Winter fishing on the devil implies active movement and search of fish. Instead of roth, devils for winter fishing are equipped with artificial bright elements that attract fish and are an attack point. How to fish on the line in winter? Consider more Mormers themselves, tackle for them, tactics and fishing technique.

Devils

Types of hell

When fishing, in the winter, various options for these muds are used. At first glance, it seems that the species are very much, and they are very different. In stores there are bimetallic soldering devils or lead monochrome, solid and composite, large and very small. The craftsmen make an even more product range. But the basic principle is one - the bait is a kind of core of the mass (body of a mash) and a hook-tee below. The differences are manifested in the details, but it is they who affect the favor of fish to the bait at a particular point of fishing.

Devils

The form

Damcons for winter fishing differ in the shape of the body of the Mormushka. Three large groups share:

  • Elongated (columns, sticks, cones),
  • Short (droplets, balls, panoratessed),
  • Relief (ants, nymphs, etc.)

These bait are made of large size or small, different weight, straight or bent, solid, or with a non-ferrous metal plate. Large are used for catching at the great depth of pikepery, they are achieved by weight up to dozens of grams, and rather with winter flashes, not by verses. The body of the devil is solid or two-stroke. Composite give peculiar wiring. Some are like microblesna.

Classic fishing traits - cone-shaped, top with thickening and rounding. Morms can be painted in different colors. Classic is considered black or lead (without color). Less often used white, red or other in color. Differences forms give different game.

Bent devils

Binding to the fishing line

According to the experienced "hells", the correct binding is in the vertical hole through the hood case. These are the devils of a famous specialist for them Andrei Kalacheva. Occasionally, such baits come across in stores. More often they are made independently or to order. Such a binding gives the right game. Calacheva's devil, according to many, the most catchy and "right", when used by the use and coating of the right fishing circumstances, "turns out" the fish from the wells.

Standard methods of binding - for a ring or through a horizontal hole in the case (as in conventional verses). Some bait with a milking method of binding give a suspension at an angle to the vertical, which gives a special, nodding game.

With a ring

Hook fastening

Trucks on hell are more commonly embarrassed into the bait housing. This is a standard option. More easily there are models with suspended crochet, which makes additional movements during wiring (devils). There are models with multiple single hooks, each of which is freely fixed on the housing. These are jellyfish (or witches). The bait, which is among the average between the feature and the Uralka - the goat, has two hooks sold out into the body.

Whole With suspended tee. Jellyfish

Decoration

The most important part of the feature is various multi-colored adhesives on hooks that directly affect the interest and irritation of fish are the attack point. These are various balls, cambricks, beads, threads, etc. Usually used white, red, yellow, orange and dark green. An interesting nuance, which often brings Poklevka - the placement of beerts over the bait freely on the fishing line. When playing, it moves, attracts fish with color and tapping about the body of the Mormushka. It is clear to say what color works better in a specific fish is impossible - this is a question of experiment during fishing. But often there is information on the Internet that white and dark green beads work on the roach, and in the perch - red and yellow. At high depth and night, droplets from phosphoric varnish on tee are well.

Experienced fishermen have a whole arsenal of various devils and advanced fishing rods. Beginners are encouraged to start with standard one-piece moods, having several black and lead models of various weights with different colors with decorations (respectively, and already tune in fully tackle so as not to do this on the reservoir). In the process of fishing, you need to pass the same wells with different snaps, changing ways of wiring until the most catchy bunch is revealed.

Set of Fishing

Snap

Using bait features on winter fishing requires a balanced snap, allowing the right game.

Fishing rod

In principle, the smaller for winter fishing on devils can be any of the arsenal of unloofers - at the discretion of the fisherman, if only it was convenient. It is better for small, light fishing rods. Some adherents use a bell-free tackle that requires microdvitzi brush's bait, and bite felt in hand. For a start, a balalaika or a unlooking smooth with a handle and a coil is suitable. The fishing rod for catching the feature is selected individually, according to its own considerations of use.

Nod

Facilities for devils - archiving part of the snap. It is from this element that the further separation of methods of catching on the line occurs:

  1. Bezkyless Tackle (Clear, the nod is simply not).
  2. Standard approach (need long and elastic nod).
  3. New approach. A part of the experienced fishermen claims that the wiring hand works better, and not at the expense of the wobbies of the waggered. Fishing rod stays almost vertically down, a soft nod is used, which is not involved in the wiring. This is something mean between the bezkyless and standard ways. Beginners are recommended to begin with the standard, moving to the next only with the acquisition of sufficient experience.

Elastic nods for the devil is made from Lavsana or a clock spring. It is important to correctly select the settings of the nod to the nodder of the specific weight. The experienced fishermen recommend using wagons, curled up at 20-30 degrees. When loading the wagon should be lowered slightly below the horizontal position. Some fishermen use the curved S-shaped nod.

Buckle.

Top under load

Both beef

It is important to choose the codes to each weight of the bait. Only the right selection of the turbine allows you to perform the necessary oscillations under water. Therefore, fisherman should have already configured fishing rods for each weight. If nods are too coarse, then it is messed up by the skin manually. Correct bending and work gives a two-block nod - tipped in thickness and width to the tip. Such a fine finish is needed under each specific feature, the correctness of the bend is checked at home with a can with water.

Leske and knots

For fishing it is necessary to use thin fishing line 0.1-0.12 mm. Only they give the right bait game. It is better to use winter fluorocarbon - such a fishing line is specifically designed for cold conditions. It is necessary to carefully approach the tie of the nodes, make the nodes before tightening, prevent damage to the fishing line and tighten. How to tie the line to the fishing line? Binding methods depend on the method of fastening the bait.

Binding nodes Damn with an eye to a fishing line

To bind a feature with an eye to a fishing line, we use conventional hook nodes with a ring.

Knot Palomar:

Palomar

Clinch and enhanced clinch:

Clinch

To make a reinforced clinch, the fishing line is still in a larger loop:

Stressed clint

How to bind the line to the fishing line without a ear

Standard bayonet knot.

The fishing line is drawn through the hole of the devil and tie on the hook. To bind the devil with a pass-through hole (Kalacheva) the same nodes are used.

Bayonet knot

Canadian eight (fishing).

Eight

In addition to one degree, the equipment is often used with the addition of the second morming on top. This installation is called the locomotive (Combi, Tandem). Some of the fishermen claims that the locomotive of two devils works better than one bait. But in its use there is a minus - when retrieving a large or active fish, the tee of the second often clings to the lower edge of the well, which is where the gathering occurs.

Locomotive

Homemade Mormushki

Many fishermen make bait alone. Catching the hell made with your own hands is a special pleasure. The manufacture of catching baits is already in itself an interesting hobby. Methods of manufacture set, from simple to more complex (with soldering or casting).

Technique fishing

Fishing will be successful if you apply the right fishing technique. Fishing in the winter for the devil is based on the tactics of active search.

Tactics fishing

The tactics of fishing on the line lies in trying a certain number of wells and waters using various bait and wiring methods. Some features impose and the type of fish at which fisherman hunts. Mormushki devils are caught on large depths, rods and tables. This fish reacts better to standard long verses. For catching the line in winter, heavier bait, locomotives or garlands are required. The roach on the non-rope (and perch) prefers smaller, short devil-droplets. During the search, the wells can be inserted, it is especially important on fishing in Ceremchosimier.

Wiring

Wiring

The effectiveness of catching the devil in the winter directly depends on the skills of the fisherman to attach the correct game. This is the main secret. It is necessary to master a few wiring, constantly alternately applying them. In 70% of cases occur when changing the game or pause. This is the main feature of winter fishing on the line.

Technique fishing for the devil:

  1. Lower the chime to the bottom.
  2. Knock 3-5 times and put again.
  3. Knock 3-5 times and leave at an altitude of 5 cm from the bottom.
  4. Performing high-frequency intermittent short raises with pauses from the bottom and takes the hand. Every multiple centimeters of the height - pause.
  5. After a pause it is useful to change the game, changing the frequency, amplitude and speed of movements.
  6. Lowering with oscillations and pauses.
  7. Smooth lifting or lowering without oscillations, with pauses.
  8. When using a locomotive at the beginning of the game, you should knock on the bottom first with the upper bait. After a pause, lift the snap and knock down. What kind of damn it works, the upper or lower, is determined by the bending of the nod.

Everything comes with experience, each fisherman has its own, specific game. It is important to find your own rhythm and fill your hand.

Loading...

Watch how to tie a murkAs soon as I did not ignore when knitting knots, when I began to master the rejuvenating fabric. How many men were not shown (then I was still a boy about 10-12 years old), I will definitely miss something. In the end, knitted how to. Satisfied on the ice and not catching a single fish simply hung up a simple twist and the worm or a worm and caught. I could not compare my failure with such a trifle, as a properly tied bait on the fishing rod, in a particular case, winter. And this is one of the components of success. Tied competently - the "Chetrik" will not hang out when the nod is moving, and therefore the chance of a positive reaction of the fish increases.

Mormers for joining the winter fishing rod have fastening rings or through holes.

Tie "Damits" with through hole

Take a fishing line through the body of the Mormushka and around one of the hooks make a loop

Primaka with through hole 1

Cress the loop to the hook and make a free short end of 3-4 turns around the hook

Crimka with through hole 2

Introduce the fishing line in the loop, we urine and gently tighten

Primaka with through hole 3

Excessive segments We remove scissors or nippers. "Damik" ready to catch. With this fastening, the bait occupies the correct vertical position.

Tie "Damik" with a fastener rings

It's not worth wise here. Clinch knot node is always the perfect option. For many years, it has been served to mount the "Witch", "Klopov" on winter fishing rods and hooks for swimming summer gears.

Due to the fishing line in the ushko

Tie the devil with an eye

Short segment wind around the main 4-5 times

Bring the devil with an eye 2

We skip the end of the fishing line in the resulting loop by the ring. You can strengthen the node if you start a short end once again at the exit in the upper part next to the main fishing line

Bring the devil with an eye 3

Wet and stretch

Bring Cherry with Easter 4

The first couple of times may not be obtained. But believe me that these are really the simplest ways of fastening the "Dami".

Sometimes, when the danger of the node of the knot appears on the edge of the ice (this happens when fishing in the frost), before tied to the Merzpy, we dress a small Cambrick on the fishing line, and then descend it to the resulting knot. In such a state, the fastening longer lives, and the multicolored prodigation additionally attracts the fish.

There is still such a miracle as "locomotive". It is when 2-3 livers are tied to the main thread. Following each other at a distance of centimeters in 20, they are taking several layers of water at once. In my opinion, somehow it does not look sports, but when using winter, short, fishing rods from a bridge or boat on open water in spring - quite effective fishing is obtained.

NHHHF.

There is no information much

How to bind the devil

Mormushka devil (damn) - a drop-like oblong embarrassment for winter fishing with three piled hooks or a suspended tee. As the most popular mormyshkoy on the perch and other fish in the winter, people have questions - "How to bind the devil right" and how to catch it?

How to bind the devil

Bind the devil to the winter fishing fishing rod can be in the same way as the usual twiser with an eye or hole. For this, there are many different, simple and complex nodes, reliable and not very. We will show the simplest and most reliable nodes for the devil.

Dams can have two types of fastening to the winter fishing rods:

  1. Through a hole in the body of a mamushka;
  2. For ushko or ring at the top of the devil.

Accordingly, to bind the devil, you can at least two ways:

  1. Over the hooks by skipping the fishing line through the hole;
  2. For the ear or ring the devil is one of the suitable nodes.

How to tie the damn without an ears (through the hole)

Damn without ears
Damn with hole

Damcons with a hole in the body can be suspended at an angle and create a more attractive game when wiring. But it is precisely such a type of attachment of the devil, causes more questions. The attachment of such a damnity looks like this:

  1. Stretch the fishing rods line through the hole of the devil;
  2. We form a loop and knit a node as in the video below;
  3. Wet the node and tighten it to the end;
  4. Cut the extra end of the fishing line.

This node or its variations are used to tie conventional muddles with a hole and for single hooks with a ring. In general, any node for the linking of the carrot through the hole is suitable for the devil.

How to bind the deer with an eye (for the ring)

Mormies devil and goat with an eye
Mormens devil and goat with rings

There are a lot of nodes for tied bait or hooks with a ring, most of which are suitable for our location. The most simple and reliable nodes for tied bait with an eye are varieties of the clinch node.

Here, for example, one way to bind the devil with an eye:

How to tie a damn with an eye

Another pair of nodes suitable for the devil with an eye:

Knot for bait with rings
Nodes for momens with rings

Several options for attaching the devil to the fishing line using different nodes on the video:

Below, we will leave another video devoted to the links of the unscrupulous and nozzles, and now we will stop on the installation of the combined equipment of the Garland type or the steam locomotive with a delicate or goat.

Mermona Garland - Snap Locomotive

Graft garland and goats
Mermon garland

The garland from Morcysk is two or more momens, tied in consistently at each other on the main fishing fishing rod. That is, garland or locomotive is a combination of various momens, the distance between which on the fishing line is 15 to 30 cm.

Installation of such a snap is not much difficult, but some fishermen have difficulties with the node of the upper mud. The wrong thing is wrong, it becomes a weak link, and the cause of the loss of several momens at once during a break.

See how to knit a row of a steam locomotive or garland correctly:

How to bind the devil - video

Various options for tosing hell and other momens with an eye and without:

One of the popular methods of non-Racing (inspection) fishing in winter is the method of catching the "Dami" ( Next without quotes, in order not to clog the ether ) - Mermatku with vertical suspension.

Damn (devil) is a non-plan for vertical suspension with 3-4 hooks, torn in all directions. The form may differ from the drop-shaped to the elongated pusation. The first thorough mention in domestic literature is dated the beginning of the 70s. That is, this type of winter fishing is already half a century without a small ... The two-dimensional model of the mobile for the type of damnity is called goat and not so popular.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips

Mormers, Benefits and Disadvantages

The devil especially manifests itself during the deafosima, when the balancars, a bald and brilliance are silent. It is worth noting that the inspection of the damn reminds the fodder base of peaceful and predatory fish - insects.

At the same time, there is an opinion, and not unreasonable that devils also serve just stimuli for a pressed fish. This is especially manifested in cases where the fish does not respond to verses with a sweep, or a float fishing rod. What is characteristic of the rearranged reservoirs, it is an inspection often shows the best quality - what is not the proof of a double strike on the instincts of underwater inhabitants?

Another advantage can be distinguished by almost perfect hurry, due to multidirectional hooks in a circle of Mormushka. Any angle of attack fish on the banner is doomed to the result.

The disadvantages should include the opposite side of the medal - the inspection in some situations is inferior to catching on a living nozzle. But everywhere in life, somewhere we find somewhere we lose.

It is also worth noting such a moment - due to the fact that the varieties of devils are a large amount, and catchy models are far from so much, then it is difficult to choose the necessary newcomer. But if the arsenal is assembled ... it will be universal and under any conditions. It is worth only true to choose all the success knots: "The choice of the reservoir and the place of catching the choice of the right weather - the choice of bait bait tackle."

Who goes to the "hell" in winter

It is possible to catch both peaceful and predatory fish, which is also the advantage of the devices.

Main customers:

  • perch;
  • chub;
  • ide;
  • roach;
  • Ripper;
  • bream, pumped;
  • ruff.
Fishing on the line in winter: how to tie the merchics, technique and fishing tips
Perch will not pass by ...

And on the line successfully catch the crucian:

How to choose a catchy

There will be no ratings here. It is more important to choose the necessary inspection for specific fishing conditions. The same model will be better to show the result in some conditions, and other worse. In the second Mormushka, on the contrary.

Also, the catchness directly depends on whether the fisherman has found a common language with one or another bait. Who will fall in hand.

You need to experiment and have a set in arsenal under a variety of conditions. Let's go through the main categories of hell.

Classic - rigidly deposited tee, or three single hooks

The main view that is an apologist in hellish fishing. Body shape is the most different - a drop, olive, cone, a trapezium, "ant" ITD. It is good that in the box were different forms, weights and materials.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips

Inspection with free tees

Another kind of variety - devils with loose hooks. This on the one hand gives a more attractive game, but also more chaotic. Therefore, the choice for rigidly and freely fixed anchors must be made on the basis of the conditions.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips

Varieties of hell - jellyfish, goats and other

Medusa - a variety of traits with hooks around the body, which are fixed with a wire ring: Fishing on the line in winter: how to tie the merchics, technique and fishing tips

The goat - the inspection on two hooks:

Fishing on the line in winter: how to tie the merchics, technique and fishing tips

Deban devils and their water test:

Dogs a large number of species and subspecies. Of different shapes and size, different design, weight, material. The selection of catching prunes is conducted for years until the universal set is compiled, in which there will be favorite inspection fabrics for different fishing conditions.

It should be understood that this type of bait makes a huge amount of both streaming manufacturers and folk craftsmen. Therefore, it is not possible to designate that the notorious top 10 of the best catching drains.

How to make a twist of your hands - invent, cook, cast

The options for making inspection with their own hands a great set.

The base / body can be made from leaf lead, wire, crushing and other primary materials.

As hooks - or tees, or single, depending on the technology.

As an additional point of attack, you can wear beads or cambricks on tees.

To give the shape of the body and its beauty can use epoxy glue, resin, gel varnish.

The loops, in the manufacture of hell with their own hands, you can and need to do different shapes and bending at a different angle to the body of a mormushka. This will help to diversify the game and will give additional fisherman opportunities when animating a carrot.

Better to see once

How to make a chime to hell with your own hands:

How to make devils for winter fishing for garland:

Another option:

How to catch a damn winter: machinery and tips

Wells are folded in a standard way. The prospective places are selected and the wells in a chess order after 8-12 meters are placed. First drive up to 15-20 holes. The faults begins with the first hole, which has already rested.

If the dot for fishing is correct, then the constituent success three is the correctly selected devil, properly configured tackle and feed (read the wiring) of the inspection. In this section - about wiring and secrets. Wiring of the inspection mormushka is more important than blades of busty yummy in the form of a moth and other lively nozzles. It is clear - the moth presses himself.

Before shipment on the reservoir and on the reservoir itself, you should turn into the following factors that are somehow affect the quality of fishing and the final success:

  • Atmosphere pressure;
  • precipitation or their absence;
  • water and air temperature;
  • Direction of the wind;
  • ice - thickness, transparency;
  • bottom - composition, litterness;
  • What insects are present in the reservoir - direct indication on how the damn it is to choose;
  • correctly selected tackle;
  • Selection of the desired delicacy and approach to the animation of it.

Basic wiring

The only right wiring is no damn and can not be. In different conditions (reservoir, type of fish, depth, atmospheric conditions, etc.) will be good different types of animation. But the operational selection of the most recipe for specific fishing conditions is the basis of success, the base of which is the experience of fisherman.

Also, you should not forget that the animation style of the bait, as the rest itself, must go, what is called, "in hand", to be the character of the fisherman, his vision fishing in general.

Practical fact. Fisherman, albeit less experienced, but well-studied concrete reservoirs and the habits of its inhabitants always wondering a more experienced "drawing", but for the first time in new conditions. It makes no sense to catch the perch there, where there is a flesh or bream, whether it is brilliantly or the devil.

But to study the animation of inspection to study will not be superfluous (why to invent the wheel in the 21st century), especially novice drawings.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips
Mormushka Animation Options

Standard - Classic Step

The most common wiring among others. Its advantage in universalism and working qualities in different fish.

Babeen falls on the bottom of the wells, it is given a pause to the ward of the nod in a strict horizontal position. It is noticeed by swelling. Next forward movements, the inspection rises to the surface of the step. It is clearly noticeable by nod - the features seek smooth movements from the step to the step.

Step size Between the steps can vary from 1-2 cm to 10-15 cm. It all depends on how aggressive wiring is needed. Let's say, a slow dribbling is good for perch than chaotic, the better. And the roach prefers short steps 5-7 cm with pauses.

Pause between rubbing Mormens from a stage to a step can be varied from almost absent to quite significant up to 5-10 seconds or more. The more active fish, the smaller the pause - in general, it is such an animation.

The pace of lifting The devil is also different from the lazy impulse for bream, crucian, to fast wiring for perch and Sudak.

You can add to the wiring Dribon elements - Permanent twitching of the inspection throughout the performance of steps. Especially effectively catching the devil to such a perch.

The height of the entire staircase is selected by experimentally and depends on what horizon is a fish. At the beginning and end of winter, it is necessary to pierce the entire horizon, often a peaceful fish graze into the floor of the water and should not be limited to the bottom layer of the reservoir. But in Clehosimia, most often the fish should be looking for at the bottom and in a half-meter meter from him. In any case, initially need to look for fish throughout the vertical and only finding it, then the active posting phase to do in the working fishing horizon.

Preliminary wiring

"Christmas tree" is one of the options for the step of the step, in which the movement of the smoothness is made not strictly vertically, but to the parties, as if to cut the characteristic teeth of the drawn Christmas tree with multidirectional waves. All other components invas stepwise wiring. More often such wiring is used when climbing the moth moth, but also in the inspection applied. Drawings use such an animation by perch.

Fishing rod keeps under some angle down to the horizon of 30-45 degrees.

Dribbling in a given promising horizon

If, with the help of the "Christmas tree" or "steps", the working horizon of fish parking is found out, then you can only turn it within 30-50 cm, after noting it with the help of Cambrick not a fishing line, or noticing with the help of the length of the sink.

The wiring lies in trembling with a particular amplitude using short snaps as a smooth. Some fishermen ask such a game with the small and fast tapping of the left hand in the world, while the vertical movement of the Mormushka is given right.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips

Teasing element - as an option for deafosima and complex conditions

In the case when the fish is passive and it clings to the bottom you can use the drawings of the definition along the bottom, almost without tearing away from it. All wiring occurs in the horizontal plane, and the nodes are bent, it is instilled, slowly trembling.

Damik - Poppong

The inspection is lowered at the bottom, after which the fisherman with point undermines with a further return of the fishing line closes the bottom. Thus, the devil just actively jumps along the bottom, lifting a small cloud of muta. Very good option on active fish and in the form of an intermediate type of animation, if the fish does not respond to the main wiring.

Lazy uniform swinging

Sleepy films without jerks with a pause in the final dead point, after which the devil begins to pour, use the bream and the bream, large roach, red-pan and other cautious peaceful fish.

It is important that the separation of the inspection of the bottom was as smooth and uniform without parasitizing the oscillations of the carriage on the rise.

Animation by index finger

In this case, the rod is retained in such a way that the index finger is on top of the whistle. The wiring is performed vertically evenly, and the rattling is set to the thumb through the whip. Boots can be both throughout the wiring and at certain points - on pauses, lifting, dedication.

Combine!

In any incomprehensible situation - experiment with combinations of various ways to supply the inspection. It is correctly selected wiring - the key to success. It is important to change the speed of animation, the sharpness of the pockets, the amplitude and the frequency of trembling, the height of the steps on the step wiring, dimension and the length of the pause.

It is also very important to look for a fish in a different horizon. We break through segments (bottom-20 cm), (20 cm - 50 cm from the bottom), (50 cm - meter over the bottom).

It is worth knowing! What if the fish stops reacting to the bait in the well, where just said? It is worth noting that after a long diversity of various types of wiring in one hole, the fish can "fit" and stop reacting even to the most delicious devil. In such a situation or it is worth allowing the hole to relax, or to put the mirosis on the bottom and give a pause without a slight movement by bait, or with minimal movement.

In general, it is worth noting that it is not worth "torturing" one hole for a long time. A dozen-one and a half of various types of animation of the delicti in one hole, it is worth moving to the next, pre-prepared well.

Video on the topic of catching shumbling in winter - master class from a professional:

Catching bream

The hell is lowered in a promising "Leshchev" place on the bottom with the playing of the nod at the blow of the inspection of the bottom. Since the bream is often not worth the bottom, but in some distance from it or at all in the thickness of the water, then the long vertical wiring will be promising with not sharp animation by the type "Christmas tree" up to the floor of the water.

Bream loves slow impulse wiring devils, especially returned controlled drops.

It is also worth using pauses and quite long with a stepped wiring.

Good in bream devils with freely suspended hooks on the highest wiring at the bottom.

Catching bream for the devil:

The bream is quite possible to catch at night, which indicates that the behavior of the inspection is more important than its appearance. And the behavior directly depends on the abilities of the fisherman correctly (from the point of view of the fish) animate the demon.

It is worth noting that when catching for devil, especially bream, the cutting should be quite fast, but not long, otherwise you can cut the thin tackle or delicate lip. And that option, as easy to guess - not the best option.

Catching perch

The perch prefers a fairly rapid rattling, combined with an average rapid speed to the surface. Polosatiki rarely respond to sluggish game, more often they give sharp and chaotic jerks.

Among the color scheme prefers black and yellow.

Catching roach (sorogues), iz and chub

This troika fish prefers more smooth wiring. Among the workers are slow and medium steps at the bottom and route, a Christmas tree without sharp jerks.

Also good animation of this species - the devil stairs rises by centimeters by 40-60. Then it is controlled by 20 centimeters to 20 and 3-4 light jerks are made, it is still lowered by 20 cm and still jerks and so until the bottom. Then the steps are repeated.

Winter fishing on the line of injections of large roach:

Catching perch

Sudak prefers a major inspection and wiring at the bottom. Step, christmas tree, various combined animations with pauses with rates and drops.

Catching crucian

When catching a crucian on the inspection of the trait, preferred options for wiring, the execution of which is possible in the thickness of the water.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips

Cylinding devils of injections - photos and fishing from the expert

The domestic fishermen are very popular in the domestic fishermen, 1-2 grams of grarm.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips

We collect the tackle

Balalaika - Fishing rod is the most popular when catching for inspection fabric. It is lightweight, well lies in hand and very sensitive. It is these qualities that make it possible to perform various animations raised throughout the day comfortable and efficiently.

A fishing rod must be with a coil and have a small weight - Balalaika precisely that.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips
Fishing balalaika

The whip is necessarily as sensitive as possible to work successfully with the lowest weights of the inspection. Materials are preferred carbon.

Kivok must match the tackle. Be sure to be a conical tipped to the tip of the shape and sufficient length up to 15-22 cm. Such length allows you to work as much as possible with the smallest damns. From materials - Loven, spring.

Varieties of nods that work with the draws:

Fishing on the line in winter: how to tie the merchics, technique and fishing tips
Nod to bream
Fishing on the line in winter: how to tie the merchics, technique and fishing tips
Cone nodes

Kivok for the inspection of the "springs" damn:

The fishing line is selected depending on the depth in the place of fishing, alleged trophies and weights of the dealer. In Standard 0.1-0.14 mm, not thicker. Otherwise, a qualitatively to play and feel small vests will not come out.

How to bind Morrowless to inspel: Damik, goat, carnations and others

The easiest and mostst option of tied features to the fishing line:

Fishing on the line in winter: how to tie the merchics, technique and fishing tips

Detailed guide on the binding of Mordysk:

As they advise some experienced one of the good options to bind the devil to the fishing line is the "eight" knot, but with a nuance. While the node is not completely tightened, wet it and shape a toothpick little loop near the ear of the attachment of the trait. This gives additional freedom when playing and, molt de, increases the catch.

Fishing on the line in winter: how to tie the merchics, technique and fishing tips
Two features on one fishing line

With proper gear, the right selected fishing site and the method of animation of fishing on the line makes it possible to get away from zero in the most difficult conditions on pressed reservoirs.

Share links:

Morms Damik - Features of fishing on the line, appliances and snap

Morms, the devil wins more and more adherents every year. This type of inspection (conditionally, some fishermen is planted by a hooker on a hook and achieve impressive catch) stably shows good results even in Clehosimia. This is due to the fact that this bait excites fish not only food interest, but a banal curiosity. Among the fishermen there was a number of representatives who catch fish in the winter only on the devil. Others are used with other rods, for example, for exploration of holes.

What is a devil?

The devil is a cleaner of an elongated shape with a small piled or suspended triple at the bottom, intended for a vertical game. Developed a variety of forms and modifications of this bait. The prototype of such a mobile in the 60s of the last century was the sea bait "Bug" V. Zakharov from Magadan. Since then, devils turned into a separate direction of winter fishing. Some sources claim that this veam is reminded of shape and movements in the water of the booplasa, so this bait is so good and attracts fish.

Despite the seeming simplicity of catching on this tackle, novice is not always possible to successfully master it immediately. This happens because of the initial absence in tactics of important details:

  1. Catching on the line requires a fine detuning the turbine under the weight of the bait.
  2. In arsenal, you need to have a set of pre-configured and equipped fishing rods with different shapes in shape and weight.
  3. On fishing, the bait options are applied (on already harvested rods) until the worker is found under these conditions.
  4. The proverb "Wolf's feet is fed" is most suitable for winter fishing with a non-Raspical Merzness Dam.
  5. It is necessary to master in excellence in several ways to play. Often biplons happen on a pause or with a sharp change of the game, the posting rate.

This article outlines how to catch fish on the line in the winter, choose the right bait and configure fishing rods. Considered some secrets and nuances of such fishing.

Unscoach

Fishing on the devil is a separate direction of treated inspection. Winter fishing on the devil implies active movement and search of fish. Instead of roth, devils for winter fishing are equipped with artificial bright elements that attract fish and are an attack point. How to fish on the line in winter? Consider more Mormers themselves, tackle for them, tactics and fishing technique.

Types of hell

When fishing, in the winter, various options for these muds are used. At first glance, it seems that the species are very much, and they are very different. In stores there are bimetallic soldering devils or lead monochrome, solid and composite, large and very small. The craftsmen make an even more product range. But the basic principle is one - the bait is a kind of core of the mass (body of a mash) and a hook-tee below. The differences are manifested in the details, but it is they who affect the favor of fish to the bait at a particular point of fishing.

The form

Damcons for winter fishing differ in the shape of the body of the Mormushka. Three large groups share:

  • Elongated (columns, sticks, cones);
  • Short (droplets, balls, pushed);
  • Relief (ants, nymphs, etc.)

These bait are made of large size or small, different weight, straight or bent, solid, or with a non-ferrous metal plate. Large are used for catching at the great depth of pikepery, they are achieved by weight up to dozens of grams, and rather with winter flashes, not by verses. The body of the devil is solid or two-stroke. Composite give peculiar wiring. Some are like microblesna.

Classic fishing traits - cone-shaped, top with thickening and rounding. Morms can be painted in different colors. Classic is considered black or lead (without color). Less often used white, red or other in color. Differences forms give different game.

Binding to the fishing line

According to the experienced "hells", the correct binding is in the vertical hole through the hood case. These are the devils of a famous specialist for them Andrei Kalacheva. Occasionally, such baits come across in stores. More often they are made independently or to order. Such a binding gives the right game. Calacheva's devil, according to many, the most catchy and "right", when used by the use and coating of the right fishing circumstances, "turns out" the fish from the wells.

Standard methods of binding - for a ring or through a horizontal hole in the case (as in conventional verses). Some bait with a milking method of binding give a suspension at an angle to the vertical, which gives a special, nodding game.

Hook fastening

Trucks on hell are more commonly embarrassed into the bait housing. This is a standard option. More easily there are models with suspended crochet, which makes additional movements during wiring (devils). There are models with multiple single hooks, each of which is freely fixed on the housing. These are jellyfish (or witches). The bait, which is among the average between the feature and the Uralka - the goat, has two hooks sold out into the body.

Decoration

The most important part of the feature is various multi-colored adhesives on hooks that directly affect the interest and irritation of fish are the attack point. These are various balls, cambricks, beads, threads, etc. Usually used white, red, yellow, orange and dark green. An interesting nuance, which often brings Poklevka - the placement of beerts over the bait freely on the fishing line. When playing, it moves, attracts fish with color and tapping about the body of the Mormushka. It is clear to say what color works better in a specific fish is impossible - this is a question of experiment during fishing. But often there is information on the Internet that white and dark green beads work on the roach, and in the perch - red and yellow. At high depth and night, droplets from phosphoric varnish on tee are well.

Experienced fishermen have a whole arsenal of various devils and advanced fishing rods. Beginners are encouraged to start with standard one-piece moods, having several black and lead models of various weights with different colors with decorations (respectively, and already tune in fully tackle so as not to do this on the reservoir). In the process of fishing, you need to pass the same wells with different snaps, changing ways of wiring until the most catchy bunch is revealed.

Snap

Using bait features on winter fishing requires a balanced snap, allowing the right game.

Fishing rod

In principle, the smaller for winter fishing on devils can be any of the arsenal of unloofers - at the discretion of the fisherman, if only it was convenient. It is better for small, light fishing rods. Some adherents use a bell-free tackle that requires microdvitzi brush's bait, and bite felt in hand. For a start, a balalaika or a unlooking smooth with a handle and a coil is suitable. The fishing rod for catching the feature is selected individually, according to its own considerations of use.

Nod

Facilities for devils - archiving part of the snap. It is from this element that the further separation of methods of catching on the line occurs:

  1. Bezkyless Tackle (Clear, the nod is simply not).
  2. Standard approach (need long and elastic nod).
  3. New approach. A part of the experienced fishermen claims that the wiring hand works better, and not at the expense of the wobbies of the waggered. Fishing rod stays almost vertically down, a soft nod is used, which is not involved in the wiring. This is something mean between the bezkyless and standard ways. Beginners are recommended to begin with the standard, moving to the next only with the acquisition of sufficient experience.

Elastic nods for the devil is made from Lavsana or a clock spring. It is important to correctly select the settings of the nod to the nodder of the specific weight. The experienced fishermen recommend using wagons, curled up at 20-30 degrees. When loading the wagon should be lowered slightly below the horizontal position. Some fishermen use the curved S-shaped nod.

It is important to choose the codes to each weight of the bait. Only the right selection of the turbine allows you to perform the necessary oscillations under water. Therefore, fisherman should have already configured fishing rods for each weight. If nods are too coarse, then it is messed up by the skin manually. Correct bending and work gives a two-block nod - tipped in thickness and width to the tip. Such a fine finish is needed under each specific feature, the correctness of the bend is checked at home with a can with water.

Leske and knots

For fishing it is necessary to use thin fishing line 0.1-0.12 mm. Only they give the right bait game. It is better to use winter fluorocarbon - such a fishing line is specifically designed for cold conditions. It is necessary to carefully approach the tie of the nodes, make the nodes before tightening, prevent damage to the fishing line and tighten. How to tie the line to the fishing line? Binding methods depend on the method of fastening the bait.

Binding nodes Damn with an eye to a fishing line

To bind a feature with an eye to a fishing line, we use conventional hook nodes with a ring.

Clinch and enhanced clinch:

To make a reinforced clinch, the fishing line is still in a larger loop:

How to bind the line to the fishing line without a ear

Standard bayonet knot.

The fishing line is drawn through the hole of the devil and tie on the hook. To bind the devil with a pass-through hole (Kalacheva) the same nodes are used.

Canadian eight (fishing).

In addition to one degree, the equipment is often used with the addition of the second morming on top. This installation is called the locomotive (Combi, Tandem). Some of the fishermen claims that the locomotive of two devils works better than one bait. But in its use there is a minus - when retrieving a large or active fish, the tee of the second often clings to the lower edge of the well, which is where the gathering occurs.

Homemade Mormushki

Many fishermen make bait alone. Catching the hell made with your own hands is a special pleasure. The manufacture of catching baits is already in itself an interesting hobby. Methods of manufacture set, from simple to more complex (with soldering or casting).

Technique fishing

Fishing will be successful if you apply the right fishing technique. Fishing in the winter for the devil is based on the tactics of active search.

Tactics fishing

The tactics of fishing on the line lies in trying a certain number of wells and waters using various bait and wiring methods. Some features impose and the type of fish at which fisherman hunts. Mormushki devils are caught on large depths, rods and tables. This fish reacts better to standard long verses. For catching the line in winter, heavier bait, locomotives or garlands are required. The roach on the non-rope (and perch) prefers smaller, short devil-droplets. During the search, the wells can be inserted, it is especially important on fishing in Ceremchosimier.

Wiring

The effectiveness of catching the devil in the winter directly depends on the skills of the fisherman to attach the correct game. This is the main secret. It is necessary to master a few wiring, constantly alternately applying them. In 70% of cases occur when changing the game or pause. This is the main feature of winter fishing on the line.

Technique fishing for the devil:

  1. Lower the chime to the bottom.
  2. Knock 3-5 times and put again.
  3. Knock 3-5 times and leave at an altitude of 5 cm from the bottom.
  4. Performing high-frequency intermittent short raises with pauses from the bottom and takes the hand. Every multiple centimeters of the height - pause.
  5. After a pause it is useful to change the game, changing the frequency, amplitude and speed of movements.
  6. Lowering with oscillations and pauses.
  7. Smooth lifting or lowering without oscillations, with pauses.
  8. When using a locomotive at the beginning of the game, you should knock on the bottom first with the upper bait. After a pause, lift the snap and knock down. What kind of damn it works, the upper or lower, is determined by the bending of the nod.

Everything comes with experience, each fisherman has its own, specific game. It is important to find your own rhythm and fill your hand.

How to bind the frozen on the winter fishing rod

For a beginner fisherman, the word "Mormushka" seems mysterious. In fact, everything is simple: it comes from the title of the lap - Bikeplava - Mormshem, and the Mormushka itself is an artificial embankment for fish that imitates the movements of this water inhabitant.

Morms - a small detail of a fishing equipment, this is a hook, deposited into a piece of metal. Made it from tin or lead, sometimes from tungsten.

The designs of Mordysk are two species - with ears and no ear. Actions to join them to the main fishing line are in full dependence on the design of this part.

Morms can be purchased where fishing gear are sold, you can make with your own hands.

What to choose?

When choosing a mash, it is taken into account which depth of the reservoir, where they are going to fish, what is the speed of the flow of water in it, and most importantly, what fish are going to catch. It is very important for a beginner fisherman to comprehend the truth: the more depth, the greater the mass of the bait, as well as take advantage of the information from the arsenal of experienced fishermen:

  • If the depth of the reservoir is no more than two meters, the mass of the carriama is 0.3-0.5 r.
  • If the depth is four to five meters, the mass of themost machine is up to 1.0 gr.
  • With a depth seven - eight meters, the winter bait should weigh 1.2-1.5gr.

It's a little to buy a little, you need to still figure out how to bind it to the fishing line, what to use the knot to attach it so that it is high-quality and not unleashed. In case of incorrect knitting knot, it will disappear, and the carrot will fly into non-existence, and the fisherman's mood will be spoiled.

From the design of the Mormushka, the method of tie nodes, which should be used. How to bind the milkovka to the winter fishing rod? This question is asked all beginner fishermen-winter. Tell in order.

How to tie a chime without a ear

For the Mormachka, in which there is no eye, the method is used simple and fishermen, the procedure for the following:

  1. Throw the line of the fishing line into the morming hole, the end of the segment should go beyond the edge of the hole about 10 cm. (Hook looks up).
  2. Education the necessary loop near the hook.
  3. Press the hook of the nobble with the loop. Screw five turns of the fishing line on the hook and this loop.
  4. In this loop to push the end of the cutting line.
  5. Tighten the node before it is moisturizing.
  6. Remove excess fishing line.

Step-by-step instruction

How to tie a chime to the fishing line with an eye

With the ear, Mortyzka to the fishing line can be tied in several ways: a simple knot, clincher and eight. We will analyze each more.

Clinch

For the bait, which has an eye, the clint node is applied.

Procedure Next:

  1. Take the line, spend it through the eye.
  2. Four - five times to wander the main piece of the fishing line, to trace so that the very first looping was not tightened.
  3. After the second step is fulfilled to turn the end of the fishing line in the loop.
  4. The knot is tightened to tighten, but first moisten it.
  5. Extra trim.

An option of execution of this node for Winter Mormushka Type "Drop":

  1. From the fishing line, missed through the eye, shape a small loop and return the line in the Ushko.
  2. Wrap around the commune five times.
  3. Take the end of the fishing line in the resulting loop.
  4. Moisten firmly pulling.
  5. Remove excess fishing line.

Eight

No less popular node "Eight", the procedure for the following:

  1. Take the mirosis with a crochet, whose sting looks up, and in her ear to start a fishing line.
  2. Leske roll into a ring.
  3. Part of the ring is wrapped with a fishing line, make several turns.
  4. The resulting winding is sharpened, i.e. The end of the wound fishing line and its remaining part pull to form eight.
  5. Roll the hook through every eight ring.
  6. Moisten the knot and tighten.

These methods of tying Mermysc chuckle are not suitable for tungsten products. This is a solid metal, the verses from it (even very high-quality) with direct contact with the fishing line quickly destroy it.

Tungsten Mormushka

There is a way to improve Tungsten Morrowchatka so that it does not cross the line. You must do the following:

  • Elastic Cambrick from PVC warm up in boiling water, stretch it to the desired diameter size and skipped into the armhole.
  • Cambricks fix and release it for the edges of the splashing hole. Thus, the fishing line will be protected from overs.

This problem can be solved differently. To protect the line from the pointed edges of tackle, you need to use a braid. To do this, the loop is made from the cord and the fishing line, which is done in the hole, while the cord should act for the edges of no more than 1 mm. The cord is attached to the tackle, and the fishing line to the made loop in the form of a node. The most famous nodes for binding Mortyeck from Tungsten - Palomar, Trilene, Improved Clinch.

How to tie two verses on one line

Usually, when installing such a snap, it is used by the main murmism without a ear, it is attached to the bottom, in the manner described above, but first need to be consolidated by the upper one. There are 2 options for mounting the upper mamushka: use the stopper in the form of Cambridge or beads and the second - with the help of a tanning leash.

Tips beginners

It would seem that difficult in tie a node? The difficulty in purchasing the right skills and in the search for those node schemes that are needed to you. The ability to tie nodes for each individual. Someone will remember a long time, and the other binds the node from the first time with a very complex pattern.

Right knotted knot:

  • It does not bloom under load, nor after removing the load;
  • "Not crawling" with an alternate load;
  • Corresponds to its intended.

It happens that incorrectly and ineptly tied bait bring great troubles: the node will unleash, and the bait together with the fish will be angry. As a result, spoiled mood and big problems.

Select hooks whose sharpness should be maximum. Use Gamakatsu, Mustad, VMC products.

It is also necessary not only to study the schemes how to correctly bind the breath to the fishing line, but also to go to the goal - to catch or without a nozzle, because the choice of the type of bait depends on this solution.

In conclusion, it can be said about Fishing on Mermatku the following. Fishing on this winter bait is a purely Russian invention (if anyone knows). This type of fishing was very much disseminated after the Second World War, although the people lived the memory that in Moscow they were caught on Mermatku in the 30s of the 20th century. Today, this type of fishing has spread throughout the world. Professionals - Fishermen are constantly engaged in improving the old forms of Morrowc, creating new and developing improved games of the game with fish.

Currently there are verses that are used without traditional conventional nozzles, the so-called "inspection". They play an important role to play "decorations" - different shiny and colored chains, cambricks, beads, etc., their oscillations in the water attracts the attention of fish.

Tips for the fisherman:

  • If you want the fishing to be productive, prepare for it in advance: stock lines, vending, rod.
  • Prepare a durable and strong fishing line so that it can withstand the weight of large fish.
  • Practice in advance how to attach twist to the fishing line, tie a loop, knots.
  • If it is winter fishing, learn how to sleep well.

Fishing has centuries-old traditions. Experience is transmitted to both fishermen lovers and professionals. From this experience, valuable advice appear ones that beginnier fishermen are necessary. With the development of the Internet, fishermen themselves are ready to share their individual hectares and tricks in various articles and videos. All this only contributes to the further development of such a fascinating classes.

Morms "Damik": size, shape and wiring options

About the fact that the Mormashka "Damik" of the catch and is not particularly difficult when independent making says constantly. However, which of the fishermen can boast that from the first fishing found a common language with "hell"?

This only on the part it seems that everything is simple. Tied to the fishing line painted "iron", pulled in the water and now the fish beats on the ice. And how do you start catching, then the dust and excitement will destroy, and disappointment comes in their place.

For this reason, beginners to master the reckon, in particular "devils", more predictable verses with planted moths and the male again returned to their place.

I understand perfectly well that articles, recommendations and training videos about catching the "Damik" already abound. There is something useful to learn. However, I can not miss the opportunity and do not add something from your knowledge and experience to the general piggy bank of fishing wisdom.

You look, someone from the beginners will come in handy. At the very first time, catching the "devil" was not charged. After unsuccessful attempts to split postponed the inspection to the side. This is a little later, when the "Witch" with Balda stood in the first place among the winter momens, returned to the "devils", looking at his mistakes otherwise.

What does the Mormshushka "Damn" look like

"Damik", or "Damn" - one of the varieties of non-Rassecks for catching peaceful and predatory fish in a plumb. Catching is made both from the bottom and in the thickness of the water.

Often, the fishermen are called "Dwarves" and other non-Racing Mormers, such as "goat", "Witch", "Spider". Yes, they are similar in appearance, decorated with the same materials. However, I believe that each inspection should be treated as a separate bait.

Looks like a Mormushka "Damn" simple. In the body, lead or tungsten, a tee is soldered, which is decorated with multi-colored rings, beads, cambricks.

It is more difficult to fulfill the "Dami" body, consisting of 2-3 segments, or when the tee has a hinge compound.

On the shape of the "Damci" body are divided into:

  • Stakes (matches, carnations).
  • Drops.
  • Spindle, or olives.
  • Balls.
  • Bananas.
  • Cone.
  • Segmented.

What to consider classic - it is not clear. I think that straight bodies resembling a column or carnations became a basic basis for fishermen creativity.

The place of fastening to the fishing line on the body "Damik" can be a special looting, like in many winter muddeks, and a longitudinal or bevelled hole.

I do not see a special difference in how the carriage is attached. Just fastening through the standard UCHO less troublesome.

Since the fish is blocked by the game of bait, that is, the need to have in its arsenal variation of forms, sizes and color ornaments. At the same time, you should not forget that the successful catch on the "devil" is based on the wiring of the Mormushka. And it affects this and the correct equipment of the weapons of fishing - fishing rods.

What a fishing rod should be for catching to "devil" and how to equip it, the conversation will be separate, now let's talk about a friend. Currently, the choice of bait in the store is great and you should know what to pay attention to the purchase of a Mormushka.

Sinking the choice of "Right Damik" in the store

Applying the word "correct" I smile somewhat. Definitely it will be the Mormushka "Damik", to which the fish will be caught. However, there are several precipitations that need to be considered when buying or if it is imparted to make the "devil" with their own hands.

When buying a "feat", like the other Mormushka, be sure to pay attention to the size and sharpness of the tee hooks.

Hooks "Damik"

You should not count that if the "Damik" three hooks, then the keyfish will definitely be hooked. Not for one, so after the hook. Practice shows that the income percentage is large enough. And the main trouble is the wrong shape of the hook and its sharpening. You can, of course, take a feet and correct, but it is better to get a quality product initially.

Small tees, with tightly adjacent to each other with hooks standing uniquely to rebel. Cause? Of course, fish gathering when fishing. Some specific, with mathematical accuracy, I will not give recommendations, just see the hooks that were open and not very small. They are obliged to play the perimeter of the body. Fish must thoroughly sit at bite.

As for the urgency, it is often advised to check the sting on the nail. However, I assure that checking the sharpness of the hook is more reliable if you spend it on straightened palm. Believe the word (you can check yourself) Not every hook is able to pass such a test. Do not put pressure with great effort. Longly took over the Tsevier and lead.

Decoration of tees at the "Dam"

Decoration at non-Racing Mud is an important characteristic. And the Mormashka "Damik" here is no exception. All these colored pieces are not only fish irritants, but also serve as attack points.

What color or complex of flowers will be the best - only fishing will show. Ponds are different and fish responds to color solutions in different ways. That is why there are such a variety in the cherished fishermen cherry frishers.

There is an opinion that the perch likes the red and orange color, the sorry green and white. However, in practice, everything often looks different. But not about this speech. Sheds themselves are able to spoil fishing.

At first , do not be fooled on the "hell", degraded as a Christmas tree. A large number of bright colors and mounted decorations are not a sign of efficiency. Much more often, the catchy "Damn" looks nubble.

Secondly The size of beads should not overlap the working capacity of the tee.

It happens that the "Creator" smelly hangs on the hook or the base of the tee too large bead. It also leads to frequent opening of fish.

Beading on the basis of the tee "Damage" should not interfere with hooking hooking when biting Hinged decorations "Damiki" should not close the sting of the hook

Mormushka "Damik" with a suspended tee or soldered - what is better?

Frankly say - often, but a somewhat incorrect question. You need to learn - every bait your place, time and fish.

It is impossible to say it is worth saying that if the fishing today and yesterday it was aimed at Mermatku with a soldered tee, then it will happen tomorrow. What will fish on the mind, how will the weather affect her activity and interest?

Therefore, going fishing, it is necessary to have a variety of bait in stock.

However, I recently refused from the Mormushka with a suspension tee. I wear a couple of "devils" in the mobility, but I rarely use it.

The fact is that with access to the larger water, the reservoir noted - on the "devil" with a suspended tee, it is mostly small in small fish. Sports, Okunk, Sometimes a Crash. The fish grealily respects the "devil" with a rigidly fixed tee.

As the fish seems to change the bait, which does not suit a large bream in a chatting tee - Questions without an answer. But I have this situation.

Another situation is described by Barnaul Fisherman in the Rybalka magazine all year 5 in 2017. In the Urals, the Mormushka "Damik" with a suspended tee called "grader". The article describes the conditions of fishing, the wiring of the Mormushka and there are such words:

It is difficult to answer, perhaps in other regions, they can establish themselves from the most positive side, but in Siberia for the fifth year we apply "graders" mainly by the latest ice.

That is, the situation in the regions is different. It is possible that you have a suspended tee on the reservoir will be the nail of the program and will "mow" fish. Large and small all year round.

Dimensional grid, or numbering "devils"

In use of the numbering of "hell" is the distribution of body length. Make a dimensional grid based on the sizes of tees is not convenient.

Suite yourself. For example, there are two fabrics with hook sizes №18 for catching roach. The same body is made of lead olives, in the other as a material taken a segment of copper wire. The mass and complex of "devils" are different. How, in this case, according to the phone, inform the partner on what size of the "hell" of the sorph is better?

It is much more convenient to use the altitude numbering. I was taught this system at one time a good friend. It is as follows.

Behind the middle of the table takes No. 10 with the height of the body "Damn" 10 mm without taking into account the tee. All that goes with an increase in height - is numbered to 0 (zero) in a step of 2 mm. The height is reduced - the number increases with 1 mm increments.

For example, if you take a ratio of 10 mm - №10 for the center of the table, then the "devil" with a body in 26 mm will be with a number 2, and with a length of 8 mm - No. 12.

At first glance, too worried, but having mastered everything falls into place. Try on a sheet of paper to prescribe this ratio. Minute business. But it becomes possible to notify each other, specifying the number and shape, and if necessary, the diameter.

On the wiring "Damik"

This is what the novice does not give rest, this is the wiring of the "Dami". I believe that I want to immediately come to the lake or the river and start to play the mormyskoy correctly. Guys, believe me that the correct game "Dwarf" is still myth.

We are all with our temperaments, grip rods and their equipment. Yes, and bait decorations play a role. Fish reacts differently.

Morms "Damik" - a specific embarrassment, and in any case, each fisherman is mastering its wiring technique.

Take a look at the following videos.

Not cunning, at first glance the same, movement. However, the approach to the game is still different. But the fish is caught. The authors of the rollers have already bent the hand on the "his" reservoir. What, by the way, is the key to success.

How to learn the wiring "Dam"

We wish to learn how to catch on the "damn" - more often attend one place. It is better if it is replete with small perch. In such a "kindergarten" optimally fueled the hand. The striped forgives many errors. Immediately strive to go to the expanses of the reservoir in the hope of grabbing - it means it is originally to hope only for good luck. Catching the bream on the "devil" is complex, as in terms of the game of frozic, and with the technique of discharge.

The finest perch is not only actively interested in the "feature", but also will give faith in the bait.

With regards to learning at home the game. Conducted in a jar with water or in the bathroom Mormashka "Damik" will not show their capabilities. Movement of the bait at depths of 30 cm and 3 meters are fundamentally different. However, dunning work allows you to rehearse the nodes and have an idea how to react and changes the position of the Mormushka to your actions. Having at first, the idea of ​​the displacements "Damik" under the water will be easier for you to adjust the movements of the hand being already on the reservoir.

They came to the ice, Naburilie the holes under the shore, to calm the soul nurtured, and at a depth of 0.5 - 1 meter began to work out the basic movements. At the same time, keeping in front of the eyes. The pripeornary petty perch will not give the morming for a long time inactive. And you, remembering your movements with your hand, try to repeat the effective wiring. The case will go, the main thing is not to lose faith.

Speaking of basic wiring "Damik", so it is not alone. Yes, and describe their occupation stupid. Always see it better.

How to catch fish on mormyshki

All fishermen in the winter fish are fishing by applying verses under the nozzle bait, but not everyone can catch fish with non-free verses. In this article, we will talk about winter carriers of cheating or lackless, about those little things that bring the success of experienced fishermen on treated fishing. According to your own experience, I will say that it becomes very annoying when a fisherman who is sitting on ice thrown out one after another roach or perch and even more surprised that he catches Winter With a rapid frozen. When you look at the movement of the hands, you don't see anything difficult in this, but you understand that it is not so trying to catch the same Mermat. Correctly say that experience comes over the years, let's see how catch Fish on non-Racing Morms. There are many diverse types of Mordysk, and what is important, you need to know how to properly cling to one or another on the fishing line.

How to tie the carrots correctly

how tie Winter Mormushki ? One of the popular catching species of the lackless bait are Mormers - "ants", "Uralkan", "Goat", they are recommended to be tied horizontally, for them it will be so correctly . In the case of a dream by one or more locomotions on the fishing line, the angle between the fishing line and hooks can vary. As a child, I was a kettle in fishing, making the "Gillanda" clinging the Mormushka about this: passing the fishing line through the hole, 4-5 times wrapping the neck of the hook and there was a snack. As a result, in such a mount, they hang vertically. This method of fastening makes it difficult to fish, the fish pecks but it is difficult to catch it, it does not fall or breaks away. For momens of the "Wire", the so-called "carnations", "devils" or "jellyfish", then they are recommended to be tied up vertically.

How to make a carriage

Mormushki "Wires" do from wire Thus: Copper wire is taken and a tight with an effort will be winding on the Tsevier hook. The number of wound wires can be different, it determines the diameter of the wedged wire and the size of the hook.

In the photo Self-timers Mormushka made of copper wire

For comparison, the wire with a diameter of more than 0.6 mm is much more difficult to notice than 0.3 mm. Pre-material is subjected to annealing and it will be soft. A little to work hard and get a great fabric for fishing on shallow-water fish. Such a mood is very simple. Some fishermen give the weight of such a bait with tungsten lamp, which also reduces the size of the carrot, because tungsten is much harder lead.

Without the presence of the fishermen experience in the fishing of with-free vespers, with the attachment of the optimal frequency of oscillations to catch a "wire" will not work. Mormers of the "carnation" type make, soldering a hook to a copper base with a tungsten rod, thus making a "nail" by the catch with a fisher.

In free trade, such baits have not yet seen, because tungsten, and not yet pressed almost anywhere. Thus, last year I made my little morter, which "does not leave" from the basis for falling. The principle is similar to fishing on the milcia.

Micro - gloss or carrots

Quite interesting is the bait in the form of micro-flames, which appeared 15-20 years ago. First, they were made from the shop glitens such as "Ovsinka", which have a crown of brass and copper. Many fishermen fear the hook, and instead of it was inserted longer, leaving the hole to tie the fishing line. Such bait was quite effective, especially when fishing on the perch, and therefore remains popular now.

Merchku "Damik"

In order for Morms, the "devil" hung on a vertically vertically, the hole under the vein should be in the center of the longitudinal axis. But do it yourself devils »Morms are very difficult, and sorry. An option with a ring on the fishing line simplifies into the homemade manufacture, but the binding knot itself in it can move, especially with a sheet of large fish.

Another option, make the "Damik" from lead loaded crushing crushers or a hunting fraction. To do It's easy: we will take the tee "Mustad", you will find it in the fishing store and the ring, made with the so-called "pigtail", then epoxy glued in the opening hole.

Also, such a moron " devil " can To do Soldering iron applying low-melting solders, even "triple", can well do each method of hooks spike, but before soldering the hooks in the site of soldering by soldering acid, otherwise the soldering make it difficult.

Mormushka shape "Damik"

The most versatile forms of such bait are "Ovsinka-Barrel" and "Long Cone". Beads on fishing hooks, it is necessary to plant at the bottom of the foundation " Damn »More 1cm. For slightly smaller length, there will be entirely enough segments from the Cambriks (1.5-2 mm), or just small points of yellow paint.

The most efficient machines are made of copper. Some fishermen before, tie the bait, the beads ride the fishing line, but I myself, honestly, do not do it, because I do not sleep well. Although there were cases when, throwing up onto Sudak, I rolled the pearl color bead with a diameter of somewhere 7-8 mm.

Experienced fishermen recommend using specially under the "Dami" in a long time in 30 cm with nicknames 12-18 cm, while grip must be "pen". Thanks to a long whip, you can back and adjust the amplitude on time, and even do it all this hand.

A feature of catching on the "delicacy" is that the fish almost never happens, and the amplitude of fishing is less compared to other verses. The most important thing to maintain the constancy of movements in its vertical wiring, but if the bait turned out to be small, then it's better to shake a little bit like when fishing "Urals". That is why I try to use the same nodes for any other mormysk. I make them from ordinary time springs and a special leashed material from titanium, the diameter of which is about 0.35mm.

Mormers of the "Medusa" type got their own neglection name due to a specific mushroom form or cone. Single hooks "Jellyfish" are fixed vertically and moving. You can use the trapping for hooks, but its application is not mandatory. The most suitable substitution material is small pieces of microporous rubber or segments of Cambriks. All other features are practically such as "Damiki". The only lack of such bait is that it is inconvenient to pull the hook from the oral cavity.

The most effective coloring for the "jellyfish" is black, or black with yellow dots, you can also paint gloss into a gauge color (not recommended to be painted with green), the purple-pinkish color will become no less useful.

The first two coloring are suitable for all kinds of fish, the rest are recommended to be used for fishing white fish. It is worth noting that it is important to use copper for a carriage. For fluctuations, a substantiation plays a considerable role, since its size proportionally affects the frequency of oscillations.

Thus, if instead of beads or cambricks, pump 1-2 plates "wings", the frequency of oscillations is reduced in a multiple. We have a nymph named of such a design. On the shelves of stores such verses appeared, somewhere three years ago, but since the price of them remains quite high, many fishermen believe that much economical will push the "wings" to any other Mermatki, receiving it in the future no less Effect.

Lochmushki baits

For many years, lovers of winter fishing have been manifested for many years to have an interest in the lacking bait "Lochmushka", which appeared, approximately 15 years ago. It consists of a metal shiny corrupt petal and a soldered petal, thickly wrapped thread from the pile. Mix micro-flashes, usually, a little higher "Ural Owls".

A properly tied hook hangs the horizontal plane in parallel with a bottom or with a small slope down. On "Lochmushki" from ice is well fishing for perch, roach, bream, Sintin, Guster. If there is a little experimenting, for example, to make the "garland": the location of the "devil", and there are one or two "lochmushki" below it. Especially effectively on Sinz and bream. What is interesting than Lochmate is bait, the more active on it to it, so it is better to take into account this rule.

In practice, avid fishermen have been taken into account for a long time, and they caught the "lochmushkami" that have a larger pile or shaggy, because the fish is truly much more interesting with great interest in these baits.

Basics of binding Mormushka to fishing rod

To successfully fish with a mormushka, it is necessary to seriously think about the reliable fixation of the bait on the fishing line. But at the same time, the made mount should not affect the position of tackle in the water and change the trajectory of her movement during the game. Snifferently tied to the mold, observing these conditions, you can with the help of special nodes. The main methods for fastening the bait to monophile and nanofila, as well as possible errors when performing this procedure - further in the article.

Merdysk tie nodes

To properly select the node, with which the versicle will be fixed on the thread, take into account several factors. The bait can have a different shape, as well as contain or not contain a special eye for the timeline . In each case, it is recommended to knit different nodes that provide a certain position of tackle in water. It is especially important to choose the right way to fasten the bait on the winter fishing rod, since in the period of dehochexia to attract the fish is quite difficult.

On the winter fishing rod to the fishing line

For winter fishing, it is recommended to use carrots with a ring. They can be reliably attached to the fishing line in several ways, and the node itself is formed on the top of the bait or on the Tsevier fishing hook. One of the most popular binding options is a clamping node.

The algorithm for its execution:

  1. Skip the monophile through the cuckle bait from the side of the hook is two or more times. There should be several free loops around the body.
  2. Carefully tighten the resulting thread rings close to the body of the bait.
  3. Wrap the terminal cut around the zevé hook to form a loop. Skip through it the free end of the thread, forming a node.
  4. Tighten fastening. Crop the remaining edge area at a distance of 3-4 mm from the node.

With an eye and without

If there is a special ear for the thread on the momens, then one of two ways are usually used for its binding. The choice of a specific node depends on how the bait should be located in water - strictly vertically or at some angle.

For fishing with a moth, you can use such an algorithm for vertical mounting gear:

  1. Skip the thread through the eye of the hook is the side.
  2. Cutting the end segment around the main fishing line in the form of a spiral, making 5-6 turns.
  3. Turn the free end of monophile through a small loop, formed near the gentle of the gear.
  4. Tighten the main thread to fix the node. Crop the extra end.

Racing bait is attached to the thread by the knot to be tied by this algorithm:

  1. Skip the fishing line through the bait ear of the hook sting.
  2. Fold the free terminal cut in half. Must get the loop of the same length as Zevyo hook.
  3. Press the thread made to the hook. Free edge wrapped the loop and Tsevyu, after performing 5-7 revolutions.
  4. Protect the end segment through the protruding top pressed to the hinge hook.
  5. Mix monophile and tighten the node. Crop the extra edge of the thread.

In the momens without a pub, a hole for the fishing line is in the body of the bait.

Such a tackle is easier to bind to the thread on this algorithm:

  1. Skip the fishing line through the hole from the side of the hook.
  2. Fold the free end segment of the thread in the form of the letter "z" (or in the form of the letter "s" if the left-hander tie). It turns out two characters in size.
  3. Cut the free end around these loops by performing 8-9 turns.
  4. The remaining end of the thread stretch through the loop, located along the root part of the monophile.
  5. Tighten the knot behind the terminal segment. Put the resulting self-pulling loop on the hook.
  6. Finally consolidate it on tackle, pulling for the main fishing line.

How to bind the momens

Experienced fishermen use several types of nodes for binding a mormushka. The choice of a specific embodiment depends on the design and material of the bait, as well as from the thickness of the fishing line. Morms from solid and heavy tungsten can damage the thin thread , Therefore, they are tied with intricate nodes, avoiding strong tension of the thread on the joints and fiba of the metal.

When using lead and tin gear, you can use simpler mounting options, but it is also required to ensure that the node obtained ensures the desired position of the bait in the water during the game.

Reliable binding

In order for the fastening to be reliable, it is recommended to use a self-pulling loop with an additional twist through the body of the tackle. Such a node allows you to avoid damage to the thread, and the load on it decreases due to the increase in the area of ​​contact with the metal.

Step-by-step binding algorithm:

  1. Insert monophile into the hole on the side of the hook sting.
  2. Once again, to finish the end of the thread through the hole of the tack of the island. Form the first loop.
  3. From the remaining end of the fishing line fold the second (auxiliary) loop, not to make a thread through the body of the bait. This round will make it possible to gently tighten the node, without running the monophile through the ends of the metal part of the tackle.
  4. To form from the left end the vertical arch close to the zevly hook, and then twist it to get another loop.
  5. Attach the latest made loop to Zevyu so that it comes into contact with it along the entire length.
  6. Wrap the free edge of the monophile around Zevya with a hint pressed to it 3-7 times, moving towards the body of the Mormushka towards the tip of the hook.
  7. Turn the free end of the thread through the top pressed to the goal.
  8. Gently tighten the knot. Moisten and tighten it using auxiliary loop.
  9. Select and tighten the first loop, having it from above or from the side of the body of a mamushka, depending on the shape of the gear.

With a ring

If the carrier has a ring, then you can attach it in two ways. In the first case, the thread is passed through the ring and is tied on top, and in the second, it is fixed on the Tsevier hook. Each of the fastening methods affects the corner of the bait hanging. For reliable binding of a carriage with a ring and a natural tissue, a palomar or a reinforced clinch is usually used.

Step by step algorithm for execution of Palemary:

  1. Fold the edge of the fishing line twice so that it turns out a long loop.
  2. Skip the top of the loop of the loop through the ring.
  3. Make an ordinary knot over the ring, wrapped the loop passed through the tackle around the main fishing line consisting of a double thread.
  4. The remaining top of the loop "throw" from the bottom to the momens so that the tackle completely passed through the round.
  5. Gently tighten the main monophile, tightening the knot over the rims of the bait.
  6. Crop the remaining end of the thread at a distance of 3-4 mm from the made knot.

To tying a reinforced clint, you need to perform such actions:

  1. Skip the fishing line through the momens. Near the ring at the same time a small loop is formed.
  2. Wrap the edge of the thread around the main monophile in the form of a spiral, making 4 turns.
  3. Skip a loose end through a small loop near the rings of the bait. At the same time, the second loop is formed between the main thread and the last twist of its spiral winding.
  4. Turn the end of the fishing line through the second loop. Gently tighten the knot.
  5. Crop the remaining edophil.

Deaf loop

This type of fastening is convenient to apply during the linking of extended and heavy bait. A prerequisite that allows you to use a deaf loop - the presence of a ring on tackle. The most strong option for such an attachment is intricate, but the reliable knot Rapala.

Step-by-step action algorithm:

  1. Make a standard single node on the fishing line, forming a loop with a diameter with a little finger. In this case, the length of the end segment of the thread should be approximately 20 cm.
  2. Skip the free end of monophile through a carriage ring.
  3. Stretch the end segment through the previously unforgettable loop formed. Adjust the length of the length of the thread, along which the cuckle will move.
  4. Wrap the main monophile with a free end, making 3-4 turns in the direction of the rod.
  5. Wrap the end segment of the thread in the opposite direction. To stretch it into an uncomfortable loop from the other side with which the fishing line started after leaving the ring.
  6. Return to free end through a large loop formed in the scrupter area of ​​the main monophile.
  7. Gently fix all the nodes, pulling at the same time for the main thread, its free end and the resulting loop.
  8. Crop the extra end at a distance of 2-3 mm from the obtained node.

How to bind nanofil to momens

Nanofil (or braid) is a thin cord consisting of several threads. It is used for tungsten tungsten tungshes, since it has increased strength compared to ordinary monophile.

The algorithm for fastening nanofila to the mormyshk includes such actions:

  1. Skip the fishing line through a hole in the tack from the side of the hook.
  2. Once again, to finish the end of the thread through the bait in the opposite direction to form a small loop.
  3. Turn into the resulting loop a small segment of nanofila.
  4. Holding the braid so that it does not jump out of the loop, pull at the same time for the main line and its free end. At the same time, nanofil will pass through the body of the gear, forming a small loop with a height of up to 2 mm.
  5. Fix the line on the resulting loop of a wicker using one of the variants of the nodes for fixing the carriage with an eye.
  6. Cut the ends of nanofila around the zevary hook. At the same time, one edge is screwed towards clockwise direction, and the second is against.
  7. Tie the edges of the bracket around the Tsevaya ordinary double knot.

With this fastening of the nanofila loop, the ears for tungsten bait, and the thread is not overwhelmed about the dense metal.

How to tie two verses

Some fishermen prefer to bind two vests to the fishing line at once to increase the efficiency of fishing. But at the same time, it is necessary to correctly arrange the bait so that they work synchronously and did not interfere with each other. Tackles have a "locomotive" or fix the lower on the leash.

The most popular way that allows you to bind two verses:

  1. Attach the upper mold to monophile with one of the above nodes. In this case, the free edge of the thread of at least 40 cm should remain.
  2. Once again, to skip the terminal segment of monophile through the eye or the body of the top tackle.
  3. Throw free edge through the second mold so that between the bait the distance is about 20 cm.
  4. Secure the second tackle with one of the nodes described above.

Video: How to bind two verses

How can not bind

Inexperienced fishermen can make errors when closing the mamushka to the fishing line, using simple nodes. They allow you to quickly attach the tackle to the monophile, but they do not differ reliability, and can also lead to loss of catch and climb the thread.

For the linking of the carrot, such ways cannot be used:

  • An ordinary or double knot on a ring, hooking gear - leads to the wrong position of bait in water and weakening the monofilament at least 2 times;
  • Clamping of the Tsevaya Lesk and the latter zazeing on itself - while the thread is constantly subjected to friction, which leads to its cliffs;
  • The formation of an ordinary knot after passing through the line through the body of the Mormushka - it performs the function of the stopper, but the bait is freely moving up on monophile, which leads to its rapid wear and damage.

To get a good catch, you need to prepare well for fishing, correctly fastening the mud at the fishing line. With the help of the recommendations listed in the article, it is possible to secure the tackle, step by step performing the specified actions to obtain a specific node. And the variety of embodiments of the attachment of the bait to monophile will allow you to choose exactly the method of binding, which is best suited for a particular machine.

How to tie a chime to the fishing line with strong nodes

Primanka called Mormushka is used for fishing in winter. It makes it made of various materials, and the game on the placement in water depends on its weight and form. The correct knot is proposed by the correct position of the bait, deduction of certain weight and visual attractiveness for mining. In the current article, we will consider how to correctly tie the milcia on the winter fishing rod.

Influence of the selected method of binding

Depending on the selected node, the following gear parameters may vary:

  1. The maximum allowable weight of production. The reliability of the node directly affects the endurance of the gear, reducing the risk of unforeseen cliff.
  2. Orientation of bait in water. Properly located tackle will provide accurately cutting, which will respectively reduce the number of waste.
  3. Visual appeal. A massive beam will be well noticeable in water, which is absolutely unacceptable in winter when the fish becomes especially careful.

  • A game. An incorrectly selected bunch can significantly limit the movements of the bait, which will negatively affect her game, and this, in turn, will reduce the effectiveness of the entire fishing process.
  • All nodes can be divided into two categories: used for Mormushka with an eye and no ears.

    How to tie a mormyshku with an eye

    If the splash is equipped with an eye, it can be tied by a node of one of three varieties.

    Tightening knots with rigid fixation

    In addition to the bait under consideration, such nodes are used to attach flies and hooks equipped with an eye.

    Improved clinch is tied as follows:

    • In the ring there is a fishing line;
    • free end is 5-6 turns around;
    • The thread is done through the resulting ring near the ear, and then through itself;
    • Tightening is carried out in two stages: first the fishing line stretches and the free end to collect the turns, then the fishing line and bait is simultaneously delayed.

    The strength of the node is 77%, but even more reliable is "Palomar" - 95%. He knives according to such a scheme:

    • The fishing line is twice and rushed through the UCHO;
    • A simple single node is created;
    • Free end (location) is thrown through the bait;
    • The bunch is gradually tightened, with the purpose of girth outstretched through the ring of turns.

    The presented nodes for Morcysc are simple in execution, invisible for fish, have good strength and allow for some limits to adjust the angle of the bait position in water. At the same time, they should be used only on thin fishing racks and in cases where the flames are not needed too much freedom of action.

    Nodes with loke

    The peculiarity lies in the fact that the bait is freely suspended. Used for fastening wobblers, fluctuating brilliance, flies.

    The most popular node is the "unlocking loop", performed according to such a scheme:

    • A loop is created on a fishing line with a fairly long free end, which then has been done in the UCHO;
    • The end passes through the loop (bottom-up) and wrap around the base (6 times);

    Returns again in the loop (from top to bottom) and is delayed - in the process you can adjust the loop size in the ear.

    Before you knit chopping in this way, it is necessary to take into account the following flaws:

    • The strength of the bundle is low due to pressing the rings on the loop;
    • The bundle is well noticeable in water, which can scare away the fish during the deafosima period;
    • Morms inclination angle is not regulated.

    Benefits include simplicity in performance, as well as absolutely free bait game.

    Nodes "on the hook"

    Such a type of binding is considered a compromise between the two types described above. The essence of the method is to tying on the crochet, while the eye plays the role of the guide through which the fishing line is doing. Strength is at the average: less than tough, but more than in the nodes from the loop. Mormushka game remains at a good level.

    Separately, it makes no sense to describe the procedure for creating a ovary, as it is the same as for the bait without a ear, we are talking about.

    How to tie a chime without an ears to the fishing line

    The most popular and universally used knot is "spindle". It is performed as follows:

      The fishing line is drawn through the hole in the bait towards the hook.

    A free end is laid along the Tsevaya, then unfolds back to form a loop.

    Holding a loop with my fingers, make 3-4 turnover of the fishing line around the comma and the loop itself.

    Hold the resulting design and turn the end in the loop.

    Tighten the bundle without effort.

  • Wash the design with water and make final tightening.
  • Remove excess with scissors.

    Vividly see what a location looks like, you can in the photo. This method has the following advantages:

    • The opening is practically impossible;
    • Does not break the game of bait;
    • A bundle is invisible for mining.

    Disadvantages are the complexity of tying - the problem is particularly acute during the operation in the cold. Also, the bundle takes part of the hook, which for instances with beads may not be the best option.

    Some fishermen, including professionals, are offered to perceive the hole on the momens as an eye. Wrinkle in this case will be created on the fishing line, and the loop will cover the bait. The method can be used to tie a small "tormenochnikhushki", which is equipped only with an attached head with joined around zevary dubbing. Nodes in this case are similar to those described for the ties of the Mormushka with the eye.

    For tungsten milmon with a sharp, unprocessed hole, a Cambrick applies. It is inserted into the hole and fastened with glue or left as it is. As an alternative - knots for momens fit using an artificial ring from a wicker. The latter is twice as well, it is done through the hole and is tied on the Tsevier ordinary node. The node used for the bait with an eye is tied for the formed loop.

  • All about catching on the "feat" in winter

    All about catching on the "feat" in winter

    At the end of winter, many fish are activated and willingly peck on various tackles. In this article we will talk about the features of winter fishing on such a mormyshku, like "Church". It is good because it does not require nozzles and therefore allows you to fish faster. And if Kleov goes weakly, you can add a moth - then you will probably wipe extraction. So, We offer you a description of this tackle and the features of its use for catching different fish.

    Features

    The first mention of "scratchik" went from seaside sailors. They used this unusual bait for catching marine fish and invented a special tactics of the game for more efficient Kleva. "Chertka" can show very good results when bowing and catching, but only in the presence of active wiring.

    Visually, this bait looks like a drop-like bait, equipped with three hooks directed in different directions. It can be used both without additional baits and with them.

    In the first case, the hooks simply hang beads or blasts to increase the attractiveness of the tackle, and in the second - the moth, flames or larvae.

    "Chertka" - a special tackle that has a number of significant advantages:

    • versatility;
    • High catchness;
    • Ability to use different animation techniques.

    Fishing itself with the use of "hell" is an active pastime, as you need to constantly move through different parts of the reservoir and look for active fish.

    It is best to use it during the last ice when the well-made wells no longer freeze, and the fisherman is more convenient to move along the reservoir. Do not stay on every hole for a long time, enough couples. First of all, you need to check those of them where the lure is visible.

    Having moved from the well to the well, do not cut the fishing line, but just hold your hands. Omitting it again under the ice, you can evaluate the depth difference and mentally imagine the relief of the bottom. Well, if you come to fish together with glitters. Often there, where glittered did not work, the fish was already activated, and the "scratchik" will help to make a conceived after unsuccessful beatings. We suggest you familiarize yourself with the two most popular ways of wiring "hell" with a fitted insect.

    Wiring with frequent oscillations

    The method is suitable for long fishing rods. Quickly raise the bait up sharply or jumps. Keep it with two fingers, big and index, holding an angle of 45 degrees relative to ice, setting the movement with a brush. Having lifted it to the height of the shoulders, lower the corner of 20 degrees to ice.

    The speed of the lifting can be different depending on the activity of the fish.

    Wiring with shaking

    Create the visibility of insect jumps along the bottom at a height from 1 to 5 centimeters with small pauses. It is more convenient to do, if you arm a short nod. Pause duration pick up the fish in this reservoir. In pauses, make the sheets, as often the fish pecks at the time of stopping the game.

    If you are comfortable to catch from the knee, you do not forget to take with you on the leda knee pads. Such an ammunition can be found in specialized fishing stores or make their own hands from felt. Protective shields used for figure skating are suitable.

    Tackle

    Equipment Fishing rods for finishing fishing "scratch" has a number of features. In this paragraph of the article you will find tips, how to properly prepare a fishing rod for catching this bait.

    Rod

    It is best to take a fishing rod with a good length of 42-45 cm, it will help keep the fish with a minimal bow. In addition, you will not have to lean hard above the hole when the bait will be low - you can stay in your place. Use the fishing rod with the coil and do not take too heavy rods. Also pay attention to the handle, it is important that it is comfortable.

    In general, it must be mobile, it is easy to understand that you can easily walk with him on the water.

    Nod

    This is a very important component of the equipment when fishing on "hell." Choose extended models with high strength - they are collapsed unsuccessful movement when wiring. It is necessary that the material of the nodder is resistant to temperature differences. Metal and lavsanovy 15-23 cm long will be optimal, such a length gives a couple of nods per second. Color can be anyone except white.

    Lesk

    Its thickness should be from 0.08 to 0.14 mm, otherwise movement will be worse to transmit from the fishing rod to the bait, and it will be noticeable for fish. Pike with her, of course, do not pull out, but a lot of other fish can be caught on the "scream".

    You can use the choice of a wicker or monopropophilic line.

    Choosing "hell" and installation

    The body size is "hell" ranges from 4 to 7 mm in length and from 2 to 3 mm wide. This is a deception in the form of a droplet or ball. There are models with decorations, for example, with brass scales - they are good for catching roach.

    Installation of the "Chertka" is simple and does not require viewing a master class video - you need to ride it on the line through the hole in the body and tie as a hook. It is also attached to the fishing line and the "damn" from the loop, only its position is obtained by the corner. Although if you are not so long in fishing, and you have doubts about installing installation, you can easily find the appropriate video on the Internet.

    Fishing techniques of different fish

    The "Chortci" pecks many different types of fish, from Karasia to Siga.

    In winter, in a period of strong ice, there is a high probability to catch not only the peaceful dwarves, but also predators.

    Bream

    Bream, like a large scammer, loves "flashes" about 7 mm from tungsten. They are lowered at a depth of 3-4 meters, where breaches often occur. But lead models are more light, so they freeze at a mark to 2.5 meters. It happens that the following are lowered to 6, and up to 8 meters - then you need to take a deck with a diameter of 10-12 mm. The fishing rod is suitable for the Mormushka, and the fishing line - 0.10-0.12mm.

    With a successful bow from ice, you should first raise a little bream, and then tighten it along the centimeter so that the fishing line can not break away from heavy fishery. At the same time, the high depth is not a minus, because if you drag fish from the depths, then it will have more opportunities for maneuvers, and a strongly elongated fishing line will be well absorted. Beads on the "Black" for bream are not used: alone is considered their useful equipment of bait, others are useless. As for color, it is equally good for bream both black and two-color, with dark and brilliant sides. There are models and and brighter color, for example, red.

    Roach

    The roach is a staine fish, so caught one individual, you can easily count on luck. Small "flashers" remind her of water invertebrates, so it is picking up the size smaller. The weight of "hell" on the roach is determined by the intensity of Klava. The more passive fish in the reservoir, the less should be the weight of the bellows, and hence the thinner of the fishing line. Usually it dwells at a depth of more than two meters, but sometimes rises and on the meter from the surface of the water. In winter, she is juting deep pits.

    It is best to firm this fish in the afternoon, in cloudy weather. The optimal time is the beginning and end of the ice station. If you still decided to look for her among the winter, then the "damn" will be a catchful bait.

    Bearing game must be more active than when catching bream, but do not forget about the pauses. They can become a moment of Claus. About the bowl says the delay in the movement of the nod.

    Perch

    Some fishermen believe that rounded "flashers" are more suitable for perch, others prefer stretched, 15-20 mm long, and 30-millimeter varieties are used to the last ice. The decorations in this case are not as important as the cooler of the hook so that the pendant perch does not jump.

    It is also important to find the right wiring, the success of fishing will largely depend on this. It is best to proven a vertical game without deviations horizontally. Dotted intermittent movements up and down resemble the perch of the movement of the booplas.

    This secretive inhabitant of water bodies in winter can be found at a depth of 8 to 15 meters and in the presence of a flow. Only sometimes in search of food, it rises to a four-meter depth.

    He souls the sandy bottom, the river bed. "Chertkit" takes Berch even where blacks are not working.

    Also, this bait can be used to search for flocks, and catching a couple of tails, switch to gloss.

    Karas.

    This fish is infrequently successful to catch among the winter. "Chertka" brings good results when catching karas at the beginning and end of the ice station. This inspection fairy shifts itself better than classic verses with various nozzles. The lead bait of small sizes is suitable.

    Crucian coars well at the bottom. Bind the "Chertka" so that the hook is on the bottom, and the subfolder at a distance from 3 to 20 centimeters. Recommended to go fishing during the daytime. Also, as in the case of other fish, when the game is a snapping, you need to pauses with a checkpoint.

    In winter, when the exchange of substances in many species of fish slows down, fishermen go to a variety of tricks. Often it is "damn" allows them to achieve the best results in this difficult business.

    The main thing is to master different wiring and actively play a snapping, as fishing on the "hell" requires fisherman of active work on the reservoir.

    About fishing on the "hell" in the winter, look in the video.

    How to tie the line to the fishing line

    How to bind the "Damik" on the winter fishing rod

    As soon as I did not ignore when knitting knots, when I began to master the rejuvenating fabric. How many men were not shown (then I was still a boy about 10-12 years old), I will definitely miss something. In the end, knitted how to. Satisfied on the ice and not catching a single fish simply hung up a simple twist and the worm or a worm and caught. I could not compare my failure with such a trifle, as a properly tied bait on the fishing rod, in a particular case, winter. And this is one of the components of success. Tied competently - the "Chetrik" will not hang out when the nod is moving, and therefore the chance of a positive reaction of the fish increases.

    Mormers for joining the winter fishing rod have fastening rings or through holes.

    Tie "Damits" with through hole

    Take a fishing line through the body of the Mormushka and around one of the hooks make a loop

    Cress the loop to the hook and make a free short end of 3-4 turns around the hook

    Introduce the fishing line in the loop, we urine and gently tighten

    Excessive segments We remove scissors or nippers. "Damik" ready to catch. With this fastening, the bait occupies the correct vertical position.

    Tie "Damik" with a fastener rings

    It's not worth wise here. Clinch knot node is always the perfect option. For many years, it has been served to mount the "Witch", "Klopov" on winter fishing rods and hooks for swimming summer gears.

    Due to the fishing line in the ushko

    Short segment wind around the main 4-5 times

    We skip the end of the fishing line in the resulting loop by the ring. You can strengthen the node if you start a short end once again at the exit in the upper part next to the main fishing line

    Wet and stretch

    The first couple of times may not be obtained. But believe me that these are really the simplest ways of fastening the "Dami".

    Sometimes, when the danger of the node of the knot appears on the edge of the ice (this happens when fishing in the frost), before tied to the Merzpy, we dress a small Cambrick on the fishing line, and then descend it to the resulting knot. In such a state, the fastening longer lives, and the multicolored prodigation additionally attracts the fish.

    There is still such a miracle as "locomotive". It is when 2-3 livers are tied to the main thread. Following each other at a distance of centimeters in 20, they are taking several layers of water at once. In my opinion, somehow it does not look sports, but when using winter, short, fishing rods from a bridge or boat on open water in spring - quite effective fishing is obtained.

    Fishing fish on Mermatki "Damik"

    Mormashka with three-four hooks is called "Damik". As a nozzle uses Cambricks or beads (most often white, yellow, red, green flowers), or catch at all without nozzle. The most common forms of "Dami" are long (body in the form of a column) and a short (thickened, barro-shaped).

    It is noticed when a slow and smooth game is used, for example, when catching a bream, it is better to use a long "devil", as it gears better. When catching the roach, it will be more like a short, plump "damn", as it will be more compact compared to a long "hell" at the same weight. As you already understood, the size and weight of the "feature", like any other location, it is important to consider.

    "Damik" on the fishing line can hang both vertically and at an angle. When he hangs on a fishing line at an angle, the condition should observe so that two hooks of three watched up. It is clear for what it is necessary, the cutting of the fish will be more efficient. Which way to choose the "feature" suspension to the fishing line is selected by an experienced way, taking into account the preferences of the "local" fish and the games of the mormyshkoy.

    1) suspended

    2) vertically suspended

    Why does the Cambrick wear on the eye? - And this is to fix the node. It happens that the Mormachka is not strictly vertically hanging, turns to the side, it has to "straighten" it all the time. So that there were no problems with this, you need to pull on the Cambrick's earco and the knot "ride" will not. Cambrick is not a prerequisite, it is possible to catch without it, if desired).

    Fish often grabs not for the hook, but for the body of a non-Racious Mormushka. Therefore, when buying, choosing the "Dami" you need to pay attention to the tee. It must be large enough compared to the body of the bait. It depends on its hooking. The imaginary line, which is a continuation of the hook sting, should not cross the body of the "feat".

    As always, we will pay attention to the sharpness of hooks, it is clear that there will be much more gathering on stupid. If there are three hooks on the "draw", then all three and should be sharp. Pick the chief in accordance with the estimated trophy size. In the small "damn" it is more difficult to catch a large fish, since the small tee will cover a large fish more complicated. Too big, too, should not be used if there are no largest bars in the reservoir, the fish of the middle and small size is unlikely to be seduced on a large "damn."

    Example Catching for Mermatki "Damik"

    The recommended nod length length is 7-10 cm, but to get a slower game, you can increase, for example, up to 15 cm. Keep in mind the shorter the length of the navigation, the topinch is faster, sharp. Increase the length only for the sake of obtaining the desired "cool" game. With too long nodes, you can not have time with the cover, then try to make it shorter or train your hand.

    The game "Dwarf" begins with tapping along the bottom. Next should smoothly shaking the tackle. Cannot do jerks, push. With the slightest change in the work of the turbine, you need to immediately make the backup. Often, the "hell" follows the fish and when you stop the Mormushka, it hangs over it, so at the end of the posting you also need to make a network. Try the frequency and amplitude of oscillations.

    When fishing on the cone-shaped "delicate" or in the form of a drop of a long 9-20 mm and a diameter of 3-5 mm, a leopard is recommended, smeared by bait. The number of oscillations per minute from 20 to 150. This game attracts, for example, bream.

    Bochemy, other thickened and tungsten "Dams" are used to get a more active game, the amount of oscillations 200-300 per minute. Such a game, for example, is already more interesting perch, roach.

    This note did not consider what specifically the winter fishing rod to pick up for a mobile "devil", as it depends on the catch of a particular fish and fisherman's preferences.

    That's all, I recommend, as an addition to this article, the following notes:

    • About the features of fishing on non-Raspical Mormers Read "Catching for the inspection"
    • How to collect a murmur tackle and how to pick up nodes for a carriage, taking into account the thickness of the fishing line described in "How to collect a winter fishing rod",
    • If you do not know what node you can bind the "devil", then this note will be useful - "How to bind Mermatku",
    • Examples of games by frozki, which can also be used when catching on the "devil", are in - "catching in winter on the milcia."

    Morms Damik - Features of fishing on the line, appliances and snap

    Morms, the devil wins more and more adherents every year. This type of inspection (conditionally, some fishermen is planted by a hooker on a hook and achieve impressive catch) stably shows good results even in Clehosimia. This is due to the fact that this bait excites fish not only food interest, but a banal curiosity. Among the fishermen there was a number of representatives who catch fish in the winter only on the devil. Others are used with other rods, for example, for exploration of holes.

    What is a devil?

    The devil is a cleaner of an elongated shape with a small piled or suspended triple at the bottom, intended for a vertical game. Developed a variety of forms and modifications of this bait. The prototype of such a mobile in the 60s of the last century was the sea bait "Bug" V. Zakharov from Magadan. Since then, devils turned into a separate direction of winter fishing. Some sources claim that this veam is reminded of shape and movements in the water of the booplasa, so this bait is so good and attracts fish.

    Despite the seeming simplicity of catching on this tackle, novice is not always possible to successfully master it immediately. This happens because of the initial absence in tactics of important details:

    1. Catching on the line requires a fine detuning the turbine under the weight of the bait.
    2. In arsenal, you need to have a set of pre-configured and equipped fishing rods with different shapes in shape and weight.
    3. On fishing, the bait options are applied (on already harvested rods) until the worker is found under these conditions.
    4. The proverb "Wolf's feet is fed" is most suitable for winter fishing with a non-Raspical Merzness Dam.
    5. It is necessary to master in excellence in several ways to play. Often biplons happen on a pause or with a sharp change of the game, the posting rate.

    This article outlines how to catch fish on the line in the winter, choose the right bait and configure fishing rods. Considered some secrets and nuances of such fishing.

    Unscoach

    Fishing on the devil is a separate direction of treated inspection. Winter fishing on the devil implies active movement and search of fish. Instead of roth, devils for winter fishing are equipped with artificial bright elements that attract fish and are an attack point. How to fish on the line in winter? Consider more Mormers themselves, tackle for them, tactics and fishing technique.

    Types of hell

    When fishing, in the winter, various options for these muds are used. At first glance, it seems that the species are very much, and they are very different. In stores there are bimetallic soldering devils or lead monochrome, solid and composite, large and very small. The craftsmen make an even more product range. But the basic principle is one - the bait is a kind of core of the mass (body of a mash) and a hook-tee below. The differences are manifested in the details, but it is they who affect the favor of fish to the bait at a particular point of fishing.

    The form

    Damcons for winter fishing differ in the shape of the body of the Mormushka. Three large groups share:

    • Elongated (columns, sticks, cones);
    • Short (droplets, balls, pushed);
    • Relief (ants, nymphs, etc.)

    These bait are made of large size or small, different weight, straight or bent, solid, or with a non-ferrous metal plate. Large are used for catching at the great depth of pikepery, they are achieved by weight up to dozens of grams, and rather with winter flashes, not by verses. The body of the devil is solid or two-stroke. Composite give peculiar wiring. Some are like microblesna.

    Classic fishing traits - cone-shaped, top with thickening and rounding. Morms can be painted in different colors. Classic is considered black or lead (without color). Less often used white, red or other in color. Differences forms give different game.

    Binding to the fishing line

    According to the experienced "hells", the correct binding is in the vertical hole through the hood case. These are the devils of a famous specialist for them Andrei Kalacheva. Occasionally, such baits come across in stores. More often they are made independently or to order. Such a binding gives the right game. Calacheva's devil, according to many, the most catchy and "right", when used by the use and coating of the right fishing circumstances, "turns out" the fish from the wells.

    Standard methods of binding - for a ring or through a horizontal hole in the case (as in conventional verses). Some bait with a milking method of binding give a suspension at an angle to the vertical, which gives a special, nodding game.

    Hook fastening

    Trucks on hell are more commonly embarrassed into the bait housing. This is a standard option. More easily there are models with suspended crochet, which makes additional movements during wiring (devils). There are models with multiple single hooks, each of which is freely fixed on the housing. These are jellyfish (or witches). The bait, which is among the average between the feature and the Uralka - the goat, has two hooks sold out into the body.

    Decoration

    The most important part of the feature is various multi-colored adhesives on hooks that directly affect the interest and irritation of fish are the attack point. These are various balls, cambricks, beads, threads, etc. Usually used white, red, yellow, orange and dark green. An interesting nuance, which often brings Poklevka - the placement of beerts over the bait freely on the fishing line. When playing, it moves, attracts fish with color and tapping about the body of the Mormushka. It is clear to say what color works better in a specific fish is impossible - this is a question of experiment during fishing. But often there is information on the Internet that white and dark green beads work on the roach, and in the perch - red and yellow. At high depth and night, droplets from phosphoric varnish on tee are well.

    Experienced fishermen have a whole arsenal of various devils and advanced fishing rods. Beginners are encouraged to start with standard one-piece moods, having several black and lead models of various weights with different colors with decorations (respectively, and already tune in fully tackle so as not to do this on the reservoir). In the process of fishing, you need to pass the same wells with different snaps, changing ways of wiring until the most catchy bunch is revealed.

    Snap

    Using bait features on winter fishing requires a balanced snap, allowing the right game.

    Fishing rod

    In principle, the smaller for winter fishing on devils can be any of the arsenal of unloofers - at the discretion of the fisherman, if only it was convenient. It is better for small, light fishing rods. Some adherents use a bell-free tackle that requires microdvitzi brush's bait, and bite felt in hand. For a start, a balalaika or a unlooking smooth with a handle and a coil is suitable. The fishing rod for catching the feature is selected individually, according to its own considerations of use.

    Nod

    Facilities for devils - archiving part of the snap. It is from this element that the further separation of methods of catching on the line occurs:

    1. Bezkyless Tackle (Clear, the nod is simply not).
    2. Standard approach (need long and elastic nod).
    3. New approach. A part of the experienced fishermen claims that the wiring hand works better, and not at the expense of the wobbies of the waggered. Fishing rod stays almost vertically down, a soft nod is used, which is not involved in the wiring. This is something mean between the bezkyless and standard ways. Beginners are recommended to begin with the standard, moving to the next only with the acquisition of sufficient experience.

    Elastic nods for the devil is made from Lavsana or a clock spring. It is important to correctly select the settings of the nod to the nodder of the specific weight. The experienced fishermen recommend using wagons, curled up at 20-30 degrees. When loading the wagon should be lowered slightly below the horizontal position. Some fishermen use the curved S-shaped nod.

    It is important to choose the codes to each weight of the bait. Only the right selection of the turbine allows you to perform the necessary oscillations under water. Therefore, fisherman should have already configured fishing rods for each weight. If nods are too coarse, then it is messed up by the skin manually. Correct bending and work gives a two-block nod - tipped in thickness and width to the tip. Such a fine finish is needed under each specific feature, the correctness of the bend is checked at home with a can with water.

    Leske and knots

    For fishing it is necessary to use thin fishing line 0.1-0.12 mm. Only they give the right bait game. It is better to use winter fluorocarbon - such a fishing line is specifically designed for cold conditions. It is necessary to carefully approach the tie of the nodes, make the nodes before tightening, prevent damage to the fishing line and tighten. How to tie the line to the fishing line? Binding methods depend on the method of fastening the bait.

    Binding nodes Damn with an eye to a fishing line

    To bind a feature with an eye to a fishing line, we use conventional hook nodes with a ring.

    Clinch and enhanced clinch:

    To make a reinforced clinch, the fishing line is still in a larger loop:

    How to bind the line to the fishing line without a ear

    Standard bayonet knot.

    The fishing line is drawn through the hole of the devil and tie on the hook. To bind the devil with a pass-through hole (Kalacheva) the same nodes are used.

    Canadian eight (fishing).

    In addition to one degree, the equipment is often used with the addition of the second morming on top. This installation is called the locomotive (Combi, Tandem). Some of the fishermen claims that the locomotive of two devils works better than one bait. But in its use there is a minus - when retrieving a large or active fish, the tee of the second often clings to the lower edge of the well, which is where the gathering occurs.

    Homemade Mormushki

    Many fishermen make bait alone. Catching the hell made with your own hands is a special pleasure. The manufacture of catching baits is already in itself an interesting hobby. Methods of manufacture set, from simple to more complex (with soldering or casting).

    Technique fishing

    Fishing will be successful if you apply the right fishing technique. Fishing in the winter for the devil is based on the tactics of active search.

    Tactics fishing

    The tactics of fishing on the line lies in trying a certain number of wells and waters using various bait and wiring methods. Some features impose and the type of fish at which fisherman hunts. Mormushki devils are caught on large depths, rods and tables. This fish reacts better to standard long verses. For catching the line in winter, heavier bait, locomotives or garlands are required. The roach on the non-rope (and perch) prefers smaller, short devil-droplets. During the search, the wells can be inserted, it is especially important on fishing in Ceremchosimier.

    Wiring

    The effectiveness of catching the devil in the winter directly depends on the skills of the fisherman to attach the correct game. This is the main secret. It is necessary to master a few wiring, constantly alternately applying them. In 70% of cases occur when changing the game or pause. This is the main feature of winter fishing on the line.

    Technique fishing for the devil:

    1. Lower the chime to the bottom.
    2. Knock 3-5 times and put again.
    3. Knock 3-5 times and leave at an altitude of 5 cm from the bottom.
    4. Performing high-frequency intermittent short raises with pauses from the bottom and takes the hand. Every multiple centimeters of the height - pause.
    5. After a pause it is useful to change the game, changing the frequency, amplitude and speed of movements.
    6. Lowering with oscillations and pauses.
    7. Smooth lifting or lowering without oscillations, with pauses.
    8. When using a locomotive at the beginning of the game, you should knock on the bottom first with the upper bait. After a pause, lift the snap and knock down. What kind of damn it works, the upper or lower, is determined by the bending of the nod.

    Everything comes with experience, each fisherman has its own, specific game. It is important to find your own rhythm and fill your hand.

    How to tie the devil to the fishing line right

    Mormushka devil (damn) - a drop-like oblong embarrassment for winter fishing with three piled hooks or a suspended tee. As the most popular mormyshkoy on the perch and other fish in the winter, people have questions - "How to bind the devil right" and how to catch it?

    How to bind the devil

    Bind the devil to the winter fishing fishing rod can be in the same way as the usual twiser with an eye or hole. For this, there are many different, simple and complex nodes, reliable and not very. We will show the simplest and most reliable nodes for the devil.

    Dams can have two types of fastening to the winter fishing rods:

    1. Through a hole in the body of a mamushka;
    2. For ushko or ring at the top of the devil.

    Accordingly, to bind the devil, you can at least two ways:

    1. Over the hooks by skipping the fishing line through the hole;
    2. For the ear or ring the devil is one of the suitable nodes.

    How to tie the damn without an ears (through the hole)

    Damcons with a hole in the body can be suspended at an angle and create a more attractive game when wiring. But it is precisely such a type of attachment of the devil, causes more questions. The attachment of such a damnity looks like this:

    1. Stretch the fishing rods line through the hole of the devil;
    2. We form a loop and knit a node as in the video below;
    3. Wet the node and tighten it to the end;
    4. Cut the extra end of the fishing line.

    This node or its variations are used to tie conventional muddles with a hole and for single hooks with a ring. In general, any node for the linking of the carrot through the hole is suitable for the devil.

    How to bind the deer with an eye (for the ring)

    There are a lot of nodes for tied bait or hooks with a ring, most of which are suitable for our location. The most simple and reliable nodes for tied bait with an eye are varieties of the clinch node.

    Here, for example, one way to bind the devil with an eye:

    Another pair of nodes suitable for the devil with an eye:

    Nodes for momens with rings

    Several options for attaching the devil to the fishing line using different nodes on the video:

    Below, we will leave another video devoted to the links of the unscrupulous and nozzles, and now we will stop on the installation of the combined equipment of the Garland type or the steam locomotive with a delicate or goat.

    Mermona Garland - Snap Locomotive

    The garland from Morcysk is two or more momens, tied in consistently at each other on the main fishing fishing rod. That is, garland or locomotive is a combination of various momens, the distance between which on the fishing line is 15 to 30 cm.

    Installation of such a snap is not much difficult, but some fishermen have difficulties with the node of the upper mud. The wrong thing is wrong, it becomes a weak link, and the cause of the loss of several momens at once during a break.

    See how to knit a row of a steam locomotive or garland correctly:

    What ways to bind winter carrots to the fishing line

    With the onset of cold weather, fishermen begin to cook winter tackle. When the time comes to the ice, everything must be ready. The Molden is no longer outside the corner, so the time is the time to consider all the options for how you can bind the merch to the fishing line. They are not so much, but each situation is suitable individually. The choice of method depends on the tackle and the type of bait.

    Features of winter nodes

    The basic requirements for winter nodes are dictated by the terms of fishing. If nothing interferes with the transshipment to calmly take the tackle calmly, then it is more difficult to do it in winter because of frost and wind. Nodes for equipping winter fishing rods are simple and durable. They knit quickly, but for this will have to practice a little.

    Morms always consists of body and hook, but the attachment methods may differ, and they depend on the configuration of the bait. Despite the variety of models, they are two types:

    • With an eye (rings);
    • With through hole.

    Based on this, nodes are selected. For momens, almost all, intended for tied ordinary summer hooks with an eye suitable. The most running of them:

    • Clinch;
    • Palomar;
    • Trilene;
    • Rapala for light bait.

    If you bind wrong, the fish will not stand. With a weak node, do not avoid losses of bait. From how correctly the mamushka is attached, the efficiency of fishing and the safety of tackle depends.

    How to tie a chime with an eye

    Often you can hear that, the bait is broken. The reason may be in the fishing line. If it is too tough or thick, the cliff has just a knot. Another important point - before tightening the fishing line must be moistened; If this is not done, even a small okoon will be able to break the bait.

    Mermatku tie so:

    1. The fishing line is passed through the ring. It is necessary to start it from the hook side. Free end leave quite long.
    2. To put it so that it goes along the body and the priest.
    3. The end to fold twice, twist your fingers to the formation of the loop. For twist, it is enough to make 5-6 turns.
    4. Put the loop on the hook, the fishing line moiste and tighten.
    5. For reliability, the operation with the loop can repeat.
    6. Excess tail cut off.
    7. It turns out the double knot is not on the ring, but immediately under the body of the mamushka on the hook.

    Another node called "Clinch":

    1. Roll through the ring.
    2. Touch both ends in the hand (the Mormachka at the same time hangs freely under its weight).
    3. Rotating bait, spin both ends of the fishing line over the ring.
    4. Skip the short end through the loop, formed near the ear, tighten, to cut off too much.

    This is a knot "Clinch", it is universal, as it is used to snap in winter and summer fishing rods, to tie any bait and elements of tackle with a ring.

    Before fishing, it is advisable to practice so that you not only knew how quickly and reliably bind anyrusive with an eye, but they could do it almost blindly. The nodes are very simple, everyone can master them.

    Morry without ears

    The greatest difficulties represent models that do not have a ring. They provide a pass-through hole in the body of the bait. Usually, the cliffs occur due to the fact that the fishing line is overwhelmed on the uneven edges of this hole. The problem is solved by stretching the Cambrid. But the hole is too narrow, just insert a Cambrick in it will not work. And this is done like this:

    1. Cambrick Heat in hot water.
    2. Gently stretch the segment about 2 cm long.
    3. Cut the edge of the painter.
    4. Skip down through the hole.
    5. Pull up so that in the body of the Mormushka entered an unreacted cambrick. It fills the hole tightly.
    6. Cut an excess, leaving about 1 mm from the edges on both sides.
    7. He heat the ends with a burning match so that they melted a little and became smooth.

    Now you can tie the bait. To do this, we use one of the most reliable and simple nodes:

    1. From the side of the hook, we skip the fishing line through the hole.
    2. We make a loop, press it with your fingers to Zev.
    3. Free end wind around the hook and pressing 7 - 10 times.
    4. Skip the logging through the loop, tighten the resulting knot well, without forgetting it to moisten.

    In this way, you can quickly tie everything that is needed, even in the cold. It will be in the right position, and thanks to Cambrick, the fishing line will not fail.

    How to tie two verses sequentially on one line

    For the gearlobe or locomotive gear, you need to post a few mormysk. This is done in different ways, depending on what baits are taken - with or without ear.

    Installation without a ears is performed as follows:

    1. In the hole of the top carriage from the side of the hook, the fishing line is passed. The length of the free end is equal to the distance between the baits, plus 15 - 20 cm on knitting nodes.
    2. Completely complement 3 turns on the main fishing line.
    3. Tighten it so that the part of the part is inside the opening.
    4. If the thickness of the fishing line and the diameter of the hole allow, the operation is repeated. As a result, double fixation is obtained.
    5. It remains to moisten and tighten the node.

    The second mobile is binding in one of the ways proposed above. For a "locomotive" tackle, tend to be taken - goats or devils (lake), but it is not necessary.

    If the baits with an eye are used for tackle, then bind two verses one after another on the line even easier. The upper embarrassment knits knot "Clinch" or "Palomar", bottom - as usual.

    Tie the devil

    The easiest way to bind the church "Damik" is a Palomar knot. He knives quickly, withstands the weight of even a large fish, and the loop freely passes through a fairly wide ring of winter bait.

    Now the devils are produced including with a through hole in the body of the bait. In this case, to tie it so that it keeps strictly vertically, not much more difficult than the devils with a ring. This is done like this:

    1. The fishing line is passed through the hole;
    2. A loop is laid along one of the hooks of the tee;
    3. Tsevier and folded loop Lesk are wrapped 5 - 7 times;
    4. Free end is extended through the previously embedded loop;
    5. The node is delayed.

    To make it clearer, we offer to watch a video:

    With this method, the devil is in the desired position. It is attractive for fish with his game and, if not tied by the rules, it will not be performed its function.

    Tungsten Mormushki

    Baits made from tungsten, heavier than lead. This allows you to quickly lower them on a greater depth, but to make through holes without chips, burr and roughness in this material is difficult. Therefore, they often dislike the fishing line. There is a break.

    To avoid this, it uses nodes that minimize the contact of the fishing line with the metal. To do this, put leashes from a wicker or a hole of the Mormushka are modified - insert the Cambrick in the way we have already told about.

    If you decide to apply a braid, then the sequence of actions is as follows:

    1. Through the hole from the side of the Tsevaya passes the main fishing line;
    2. Form the loop out of it, and skip the free end of the back - on the one hand the hole will be looped, on the other - two end of the fishing line;
    3. Through a braid through the loop;
    4. Pull out the two end of the fishing line so to stretch the wicker to the side of the hook bang;
    5. Now there is already a loop from a wicker (it will execute the role of the ears), its height is 1-2 mm;
    6. The free ends of the braid must be crushed the hook (one end is winding it clockwise, another - against);
    7. We tie the usual knot, the ends of the braid can not cut, they will be a kind of plumage attracting fish;
    8. The main fishing line is tied to the loop of a wicker by any of the fishing units.

    On the package there is an instruction, where it is indicated in detail how to tie the breath to the fishing line, but most of the fishermen use the same proven, brought to the automatic nodes. They are not so much as it may seem. Universal, such as Clinch and Palomar, are completely suitable for the beginner.

    Sources:

    http://makchen.ru/kak-privyazat-chertika-na-zimnyuyu-udochku.html http://zamryb.ru/zametka5-lovlya-na-chertik.html http://podlednik.ru/snasti/bezmotylka/ Mormyshka-Chertik http://winter-fishing.ru/diy/kak-privyazat-chertika-k-leske-pravilno/ http://samrybak.ru/kak-privyazat-mormyishku-k-leske.html

    Статьи

    Добавить комментарий